Cover for LED Plot round, 1 beam, silver
Max load of 800 kg
You will require a LED lamp insert and transformer to complete the kit
The LED lamp is 2.6w
Stylish modern contemporary designed domed LED walkover deck or pathway light.
Simply select the amount of slots you require in the domed head which can be either
a single slot to let a single beam of light out or a twin opposing slot for two beams
of light or four slots to throw light out four different directions.Once you have
decided on the type of light distribution you want you then have a choice of three
LED lamp options. The first is a cool white then a warm white and finally a blue
LED insert is available. You will ten need a 12v transformer to run the lights which
use 2.6w each The IP44 10va / 12v 451010 transformer will run 3
light fittings. There is a wide selection of exterior transformers available on this
web site but please feel free to call our office for further advice.
The power LED requires a driver unit to run them
All recessed luminaires must have adequate drainage beneath each fitting to allow
water to disperse, especially in clay based soil beds. All cable joint must be 100%
watertight and there a number or waterproof transformer boxes and heat shrink cable
joint kits on our web site to choose from. We would advise that all connections and
transformer be kept above ground where possible as the weakest link in any exterior
garden electrical installation is joining cables together. Magic gels and resin compound
kits will ensure a 100% waterproof enclosure for the cable joints. To be 100% sure
that the cables in the junction box are water tight you can use the magic gel or
two part resin mix which is poured in to the box to make a dry connection.
Please ensure that your electrician is NIC EIC certified and has done exterior lighting
installations before. Also ensure that all rubber gaskets are clean and dry before
screwing down the front glass and bezel for a water tight seal. We would suggest
you use a copper grease on the fixing screws to reduce corrosion and make life easier
when you need to remove the bezel.
Operate only with a conventional toroidal transformer
All the luminaires on our web site have been specifically designed fit for purpose
and assigned a relevant IP rating which denotes the amount of protection that is
required from water and dust. More information on IP ratings can be found in the
design ideas section on this web site.
3 lamp options
3 cover plate options
Child safe due to the cool running temperature of LED lamps.