Not suitable for use with 240v power supply
These G4 LED capsules use Epistar COB (chip on board) technology for maximum effect and reliability. Both warm white and daylight are available (select above), both of which have very high lumen outputs for their wattage at up to 130 lumens per watt, consuming less power for a brighter light. Clear silicone is used to mould the entire lamp, rather than glass, which adds to the durability and also looks unique.
They are compatible with 12v A/C transformers as well as DC transformers with no special drivers required, and have a vast working range of between 10 and 20 volts, protecting the lamp from an increase / decrease in voltage should it occur.
The amount of light that is produced by a lamp is called lumens and the more lumens the lamp has the brighter it will be. Lumens work in conjunction with kelvins and should not be taken in isolation of each other. For example if you had a very warm white lamp at 2,700 kelvins and it produced 300 lumens and you then had another lamp which was a cool white 6,000 kelvins which also produced 300 lumens the cooler lamp colour would always appear brighter to the naked eye than the warmer one this is due to the receptors in the eye that react better to a white light spectrum. Another factor on how bright a light may appear is contrast. So if you shine a white 6,000 kelvin light onto a dark wall and a warm 2,700 Kelvin lamp onto a white wall the warmer lamp would appear brighter due to the contrast of the material it is focused on. So when choosing a lamp always take into account the area you want to illuminate and think about Kelvins (colour ), Lumens ( brightness) and contrast (colour of area).
|Dimensions:||L = 28mm (exc. connector pins) W = 10mm|
|lamp life:||30,000 hrs|
|colour temperature:||3000 Kelvin, 6000 kelvin|