01689 606342

Unlike large solar panel systems that can take many years to pay for themselves, Geo Mains Free Solar Lighting Kits deliver instant savings. Installing a mains lighting to remote locations isn't always possible and is often highly expensive when it is.

Our Geo kits can be installed by anyone with basic DIY skills and are exempt from Part P of the building regulations which means there is no need to pay an electrician to have your kit installed and certified.

The Geo 1 - Mains Free Solar Lighting Kit can be used with a 12ah or greater 12v battery. It is recommended however that is you are only using a low capacity battery that you either add a charge controller to the system or disconnect it when not in regular use, to prevent overcharge.

Key features


  • Cell: Polycrystalline silicon cells
  • Size: 364mm x 164mm x 17mm
  • Encapsulation: sealed with low iron tempered glass and anodized aluminium alloy frame
  • Peak output: power 5w
  • Peak voltage: 18v
  • Open circuit voltage: 21.6v
  • Life span for each module: 25 years.
  • Connection box: waterproof junction box.
  • 20 Year Warranty

Geo 1 Applications


The Geo 1 will light an area of 16 Square Metres making it ideal for medium sized rooms, sheds, garages, outhouses, wendy houses, greenhouses and tree houses. As well as providing you with lighting you can use the charge stored in the battery for powering a variety of small electronic devices simply by adding an inverter.

What Battery Do I Need?


You can choose a battery using the drop down selector above the Add to Basket button. If you already have a 12v battery you can use it with this kit, please note using a lower capacity then recommended will reduce the length of time the lights run for.

How does it work?


The solar panel within this kit will generate electicity from the sun, into a connected 12v battery. This battery then stores the power ready for use when required. Connected to the battery via a simple circuit are the 12v light bulbs, with a switch situated between them and the battery. Once the switch is turned on the circuit is complete and charge from the battery will power your 12v lightbulbs.

What You Get


  • 1 x 5 Watt solar panel
  • 2 x Crocodile clips
  • 2 x Fuse holders
  • 2 x 5a fuse
  • 6 x Ring terminals
  • 1 x Light bulb holder (bayonet fitting)
  • 1 x 9w 12v spiral light bulb (bayonet fitting)
  • 1 x Light switch box
  • 1 x Individual connection blocks
  • 4 x Screws
  • 4 x Roof fixing blocks
  • 1 x 5m run of cable
  • 4 x Cable ties
  • 8 x Cable clips