LV-SS414SQ and LV-BL414SQ Range of lights
LV Square recessed light for floors/walls/steps or decks, IP68, 316L stainless steel - Made to order
lead time 3 weeks.
Small 50mm square recessed light designed, manufactured and hand assembled in England.
an integral high quality CREE LED chip and comes in warm white 2700k. Up to 2.4w, 140 lumens
using a (constant current) LED driver, 350mA, 500mA or 700mA. Choice of beam angles.
1m cable. 5 year guarantee.
British designed, manufactured and hand assembled recessed floor/wall/step or deck light,
machined from solid bar stock in 316L stainless steel.
This lighting product has been designed for the up lighting of walls, pillars, and garden structures
and can be mounted as a hardscape product
used for the lighting of steps or installed into lawn/soil
using the PVC mounting sleeve provided. It can also be used for universal design
This product has the choice of three light outputs from a constant current supply of either 350mA,
500mA or 700mA. The minimum output @350mA is 80 lumens @1.2w.
The maximum output @700mA is 140 lumens @2.4w.
Choice of beam angles 10º, 18º, 32º or 42º.
Comes pre wired with 1m of 2 core HO5RN-F rubber cable and a 5 year guarantee.
This fitting is made to order and the lead time is approximately 3 weeks.
Our products utilise integral chips from LED manufacturer CREE, with ‘BIN’ number 8B4. This ‘BIN’
number is a great advantage for professional designers as it gives them confidence is specifying a
particular range of products with complete colour consistency, and eliminates the visible shift in
colour which can be noticeable
with poorer quality products placed in close proximity to one
Our high quality integral LED's have an extremely long life expectancy. At the end of the LED's life, or in the unlikely
event of a premature failure, the LED can be factory replaced for a small fee if out of guarantee.
All recessed luminaires must have adequate drainage beneath each fitting to allow water to disperse, especially in clay
based soil beds.
All cable joints must be 100% watertight and there are a number or waterproof transformer boxes and heat
shrink cable joint kits on our
web site to choose from.
We would advise that all connections and transformers be kept
above ground where possible as the weakest link in any exterior
garden electrical installation is joining cables together.
Magic Gel should be used in the termination boxes to reduce the risk of water ingress.
Please ensure that your electrician is NIC EIC certified and has done
exterior lighting installations before and conforms to Part P
Care should be taken for the environment and local wildlife to
maintain the ecological balance. Insects, bats, wildlife can
all be effected by light pollution. The warmer colour spectrum of (
2,700 Kelvins ) does not interfere
with insects and general wildlife as much as the blue colour
spectrum of light around 6,000 kelvins which can disrupt
their normal night time activity. This also applies to bats where a
anti glare light fittings works better as well as
reducing the overall light pollution in the area. You must also be
mindful of your neighbours and the effect your lighting
can have on them and shining a 500w tungsten halogen flood light in
to their windows at night will cause them distress.
Try to keep the light in a downward position and local to the items
you want to illuminate and even if you want to illuminate
tall trees it can be done in a sympathetic way by placing a ground
buried or surface spike flood light directly under
the trees to illuminate the canopy. Some light fittings also have a
anti glare shield fitted to reduce light pollution.
IMPORTANT - WIRING TO BE IN SERIES