01689 606342


LV-SS305
LV Under water light, IP68, 316L stainless steel -
Made to order lead time Up to 3 weeks.
Compact 38mm under water light designed, manufactured and hand assembled in England. Has an integral high quality CREE LED chip and comes in warm white 2700k. Up to 2.4w, 140 lumens using a (constant current) LED driver, 350mA, 500mA or 700mA. Choice of beam angles.
1m cable. 5 year guarantee.
British designed, manufactured and hand assembled 316L stainless steel, for mounting in water features/fountains.
This fixture has been designed for placing under water and is secured with a weighted base, this will ensure no linings are punctured with the use of screws for fixing. Fully adjustable in vertical or horizontal positions.
This product has the choice of three light outputs from a constant current supply of either 350mA, 500mA or 700mA.
The minimum output @350mA is 80 lumens @1.2w.
The maximum output @700mA is 140 lumens @2.4w.
Choice of beam angles 10º, 18º, 32º or 42º.
Comes pre wired with 1m of 2 core HO5RN-F rubber cable and a 5 year guarantee.
The product utilises integral chips from LED manufacturer CREE, with 'BIN' number 8B4.
This BIN number is a gret advantage for professional designers as it gives them confidence in specifying a particular range of
products with complete colour consistency, and eliminates the visible shift in colour which can be noticeable with poorer quality products
placed in close proximity to one another.

Our high quality integral LED's have an extremely long life expectancy. At the end of the LED's life, or in the unlikely event of a premature failure, the LED can be factory replaced for a small fee if out of guarantee.


Installation


All ground recessed luminaires must have adequate drainage beneath each fitting to allow water to disperse, especially in clay based soil beds.
 All cable joints must be 100% watertight and there are a number or waterproof transformer boxes and heat shrink cable joint kits on our web site to choose from.
We would advise that all connections and transformers be kept above ground where possible as the weakest link in any exterior garden
 electrical installation is joining cables together. Magic Gel should be used in the termination boxes to reduce the risk of water ingress.
Please ensure that your electrician is NIC EIC certified and has done exterior lighting installations before and conforms to Part P certification.

Environmental impact

Care should be taken for the environment and local wildlife to maintain the ecological balance. Insects, bats, wildlife can all be effected by  light pollution.
The warmer colour spectrum of  ( 2,700 Kelvins ) does not interfere with insects and general wildlife as much as the blue colour spectrum of light
 around 6,000 kelvins which can disrupt their normal night time activity. This also applies to bats where a anti glare light fittings
works better as well as reducing the overall light pollution in the area. 


IMPORTANT -  WIRING TO BE IN SERIES






<

Item Specifications

Beam Angle: 18°, 10°, 32°, 42° Ripple Finish
LED Colour: 2700K
Lamp description: CREE XP-E (integral LED - BIN Number 8B4)
Voltage: Constant Current using LED driver, 350mA, 500mA or 700mA
IP rating: IP 68
Materials: stainless steel 316
Dimensions: 92mm overall length including base, 45mm diameter
Dimmable: yes
cabling: 1m 2 core HO5RN-F rubber cable
Guarantee: 5 Year