This professional and robust illuminated bollard with photocell has a fortress head and a matt garden green or graphite black finish. 4 different heights are available (400mm, 600mm, 800mm or 1000mm) - a height suitable for every application such as driveways, paths and sectioned areas. There are also three styles of head to choose from, one being a 'domed' top,one being a 'pillar' top and the third being 'flat' top.
The inbuilt photocell dusk to dawn sensor automatically turns the bollard light on when it detects dark (dusk) and off again when it detects light (dawn). This means there is no need to remember to switch the fitting on and off manually, and will generally result in less product maintenance. Fitted with an E27 LED (available from Lumena), this photocell bollard is an ideal and effective way to reduce energy bills yet add security.
The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins
which is in the warm colour spectrum and a lamp with 6,000 kelvins would be at the very cold white spectrum. Getting
the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften skin tones and gives
a warm soft relaxed feel and at the other end of the scale a 4,000 to 6,000 kelvin lamp colour would be used in
offices or a fast food restaurants to make you feel less comfortable and relaxed and more alert. There’s nothing that
can sour your opinion of a compact fluorescent or LED lamp like buying a 4000K or 5000K bulb when you meant to
buy a 2700K bulb, or vice-versa. When you buy a new, energy efficient bulb, keep your application and colour scheme in
mind and make sure to buy the bulb with a colour temperature to match.
Choosing the style of a product is only part of the equation you must also think of where that product will be used and how it will be installed. All exterior lighting products on our web site have a IP rating which is explained further in our design ideas section but in simple terms the IP rating is appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation as the weakest point is always cable and transformer joints. All joint must be made 100% water tight and this can be done using heat shrink kits, waterproof junction boxes which are then filled with a resin mix. All joints where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially in clay based soil areas. If possible use ground surface spike lights rather than a buried light. Mains 240v cable will have less joint than a low voltage installation but care must be taken with the cable runs.
Light levels are measured in something called LUX. Put simply LUX is a measurement of light falling on a given surface area. For example an average LUX of 200 would be needed for an outdoor tennis court for recreational purposes and a side street walkway would have an average of 5 LUX. To calculate lux levels you need a very good calculator or computer as there is a number of factors that need to be taken in to account.
Sunny June day 80000 Lux
Bad light stopped play at Lords 1000 Lux
A well lit office 500 Lux
Main road lighting 15 Lux
A residential side street 5 Lux
A clear moonlit night 0.2 Lux
|colour:||Garden Green, Graphite Black|
|Lamp base:||ES / E27 Screw Cap|
|IP rating:||IP 65|
|Materials:||Aluminium / Stainless Steel|
|Height:||0.8m, 0.6m, 1.0m, 0.4m|
|Sensor_Description:||Photocell (Dusk to Dawn)|
|Material Finish:||Garden green powder coated|
|mounting:||Internal Mounting Base|
|Head Choice:||Domed Fortress, pillar Fortress, Flat Fortress|