01689 606342

The 'Charleston' bollard light is a high quality, traditional path light crafted entirely from solid brass. It's decorative, high end, gold appearance is stunning and smart; the perfect choice where a classic path light is needed. This finish is known as 'Antique Brass'. Path lights made from brass are usually offered with the view that they are suited to smaller gardens or lighting systems, however this impressive garden path light is 600mm tall and will really make an impression.

The Charleston is durable and robust and has 3 protective rings around the diffuser / shade to add security. These protective rings also add further charm to the path light.It has an IP rating of IP55 meaning it can withstand outdoor environments up to a high level. Once lit, the light emitted is diffused evenly in 360ยบ. This subtle glow of light diffusion is perfect for lighting path areas to guide the way, on driveways or as part of a feature area in a garden.

Materials / Finish - Solid Brass - Gold Bronze Finish
Voltage - 220 - 240v
Lamp Holder - ES / E27
Max. Wattage - 18W
IP Rating - IP55 (suitable for outdoor use)
Dimensions (approx.)
Base: 102mm
Width: 102mm
Height: 600mm

Bollard types and spacing

Bollard lights are available in a massive choice of styles, finish and lamp options. You need to think about how the light will be used for example a small garden pathway, the main driveway, to illuminate steps etc.  If you are within 20 km of the coast you should think about using the wooden bollards or marine grade 316 stainless steel. Some bollards have built in LED lamps  and they generally offer lower levels of light ( lumen's ) than say a compact fluorescent. Also if the lamp is an integral part of the bollard then it can not be replaced if it fails in future so you will have to purchase a complete new bollard. There are bollards that use GU10 lamps and in this case can be changed for a ECO friendly GU10 LED lamp. The spacing of the bollards will depend on the lamp output, louvre design, height etc but a general rule of thumb would be no less than 3 mtrs and no more than 12 mtrs apart. The shorter distance would be for garden pathways and the longer distance is for long drive ways.


Choosing the style of a product is only part of the equation you must also think of where that product will be used and how it will be installed. All exterior lighting products on our web site have a IP rating which is explained further in our design ideas section but in simple terms the IP rating is appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation as the weakest point is always cable and transformer joints. All joint must be made 100% water tight and this can be done using heat shrink kits, waterproof junction boxes which are then filled with a resin mix. All joints where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially in clay based soil areas. If possible use ground surface spike lights rather than a buried light.  Mains 240v cable will have less joint than a low voltage installation but care must be taken with the cable runs.

All exterior lights must be installed by a certified NIC EIC electrical contractor and all cable joints must be 100% watertight. There are a selection of waterproof jointing kits and boxes available on this web site.

Light levels ( LUX )

Light levels are measured in something called LUX. Put simply LUX is a measurement of light falling on a given surface area. For example an average LUX of 200 would be needed for an outdoor tennis court for recreational purposes and a side street  walkway would have an average of 5 LUX. To calculate lux levels you need a very good calculator or computer as there is a number of factors that need to be taken in to account.

Average levels of illuminance in Lux

Sunny June day 80000 Lux
Bad light stopped play at Lords 1000 Lux
A well lit office 500 Lux
Main road lighting 15 Lux
A residential side street 5 Lux
A clear moonlit night 0.2 Lux 

Environmental impact

Care should be taken for the environment and local wildlife to maintain the ecological balance. Insects, bats, wildlife can all be effected by  light pollution. The warmer colour spectrum of  ( 2,700 Kelvins ) does not interfere with insects and general wildlife as much as the blue colour spectrum of light around 6,000 kelvins which can disrupt their normal night time activity. This also applies to bats where a anti glare light fittings works better as well as reducing the overall light pollution in the area. You must also be mindful of your neighbours and the effect your lighting can have on them and shining a 500w tungsten halogen flood light in to their windows at night will cause them distress. Try to keep the light in a downward position and local to the items you want to illuminate and even if you want to illuminate tall trees it can be done in a sympathetic way by placing a ground buried or surface spike flood light directly under the trees to illuminate the canopy. Some light fittings also have a anti glare shield fitted to reduce light pollution.

Item Specifications

Lamp base: ES / E27 Screw Cap
Voltage: 220 - 240v
Max wattage: 18 Watt
IP rating: IP 55
Materials: Solid Brass - Gold Bronze Finish
Width: 102mm
Height: 600mm
Guarantee: 5 Year
base length: 102mm