01689 606342


Dolix Out, outdoor round, GU10, white, frosted front glass, IP44


The Dolix Out range is available in low voltage MR16 or mains voltage GU10 and a number of colour options.

Can be used in soffits, porches, exterior ceiling voids. When lighting is fixed into the soffit boards great lighting effects can be created that wash the walls with light. Narrow beam lamps and coloured lamps can also be used to make more of a decorative effect if desired. Some soffit recessed lighting can be relamped from above and below to make maintenance easier. Wiring regulations would suggest that a ingress protection of IP23 would be sufficient in this location but using a fitting with a higher IP figure can only ensure extra protection in exposed locations.

Where depth is available they can also be used in an entrance porch linked to a motion detection PIR so they come on only when required. 
 

Example of Energy saving LED lamps

The use of energy efficient LED  lamps are long lasting and therefore ideal for areas where access is a problem and regular lamp changes would not be desirable.

                       
                         

Light output ( Lumen's )


The amount of light that is produced by a lamp is called lumen's and the more lumen's the lamp has the brighter it will be. Lumen's work in conjunction with kelvins and should not be taken in isolation of each other, for example if you had a very warm white lamp at 2,700 kelvins and it produced 300 lumen's and you then had another lamp which was a cool white 5,000 kelvins which also produced 300 lumen's the cooler lamp colour would always appear brighter to the naked eye than the warmer one this is due to the receptors in the eye that react better to a white light spectrum. Another factor on how bright a light may appear is contrast so if you shine a white 5,000 kelvin light onto a dark wall and a warm 2,700 kelvin lamp onto a white wall the warmer lamp would appear brighter due to the contrast of the material it is focused on. So when choosing a lamp always take into account the area you want to illuminate and think about Kelvins ( colour ),  Lumen's ( brightness) and contrast  ( colour of area).



                                                           


Features

Ceiling thickness max 15mm
IP44
Can use LED lamps
70mm Cut out
130mm Depth
35w Max lamp



Item Specifications

colour: titanium, chrome, white, Silver Grey
Lamp base: GU10
Lamp description: GU10 230 V max 35 Watt
Cut out: dia 7 cm
Installation depth: 13 cm
Overall diameter: 8 cm
Weight: 0.300 kg
Voltage: 12 Volt, 230 Volt
Max wattage: 35 Watt
IP rating: 44
Materials: aluminium / glass
Bezel: Round Bezel, Square Bezel