01689 606342

IP68 l.e.d. Power Supply - Black - 12v dc 15w



The B9403 ground burial 12v weatherproof power supply is pressure sealed into a black polycarbonate box. Each power supply has a self-resetting thermal cut-off to protect against overload, 1.2m mains input cable and 1.2m 12v output cable for connection using separate weatherproof junction boxes (cable & connections carrying different voltages must be segregated)

Colour/Finish
Black

IP rating
IP68

Construction
Power supply pressure sealed into a black polycarbonate box

Input voltage
240v input

Installation
Make all connections in T9969 underground joint kit or similar resin-sealed joint. (Boxes with silicon-sealed lids do not protect against ingress of moisture through condensation and capillary action: ordinary silicon sealant does not bond reliably with all enclosure materials.) After burying the transformer and associated junction boxes, lay a paving slab or similar protective material over it, cover with cable warning tape and back-fill hole. NB: Where multiple ground burial transformers are to be installed in an area, allow connection points where possible above ground to allow for isolation in the event of future fault-finding. Connection of transformers to separate cores of a multicore cable may also be considered. Failure to adopt these recommendations may mean difficulty in fault diagnosis in the future and in extending or upgrading the system.


Item Specifications

colour: black
IP rating: IP 68
Dimensions: Diameter 60mm Length 150mm
Technical: Connect 400mm mains cable into a weatherproof junction box and 400mm 12v cable with a T9962 cable joint kit
watts: 15w. for LED use only
Input Voltage: 240v
additional information: LED driver polycarbonate box, with 400mm mains input cable and 400mm 12v cable