Modula ground, 15 degree adjustable, up light, Square, Textured brass, 12v, IP67
E8861N is a stylish 12v recessed uplight with a choice of 20-50w halogen lamp or low energy led module. Modula is fitted with a flush lens as standard. The light is located by an O ring on the body into a sleeve tube. To facilitate removal of screws for future relamping or other maintenance, apply copper grease to the threads of all screws being fitted for retention of bezels, grills or other top plates or retaining rings. Copper grease resists degradation due to heat and protects against difficulty in removing screws, particularly where stainless steel screws are fitted with aluminium parts. It may also be used on screw threads of screw-off bezels or glare shields. Ensure surplus is cleaned off with a solvent to prevent staining in use.
LED energy saving example
All recessed luminaires must have adequate drainage beneath each fitting to allow
water to disperse, especially in clay based soil beds. All cable joint must be 100%
watertight and there a number or waterproof transformer boxes and heat shrink cable
joint kits on our web site to choose from. We would advise that all connections and
transformer be kept above ground where possible as the weakest link in any exterior
garden electrical installation is joining cables together.
Please ensure that your electrician is NIC EIC certified and has done exterior lighting
Typical loading on a transformer
Fine sandblasted cast brass finish looks good on decking, timber, sandstone and buff brickIP rating
Front bezel is attached to tubular aluminium body. 1m cable via rear entry cable glandInput voltage
MR16 20w or 50w halogen lamp or MR16 LED modules include white or warm white 3w or 5w; 50,000 life and low energy consumption make them a popular optionInstallation
There is space inside the body to fit a clip-on MR16 spread lens or colour filter accessory onto the front of the lamp. E8700FLN Modula frosted lens may be fitted for softer, more diffused lighting effectsAccessories
There is space inside the body to fit a clip-on MR16 spread lens or colour filter accessory onto the front of the lamp. E8700FLN Modula frosted lens may be fitted for softer, more diffused lighting