The Smartspike 60 is a stylish 60mm diameter spotlight with a 250mm (approx.) spike, fantastic for any garden or outdoor space. There are many different applications for this versatile landscape light. Directly uplight small trees, features or statues, or mount in areas of planting to bring elegant illumination to a general area. An extra 250mm extension rod is available to instantly add height to this garden spotlight, making it ideal for use in areas of taller planting.
Outdoor lighting crafted from solid brass is naturally robust and durable (IP65), and due to the antique 'rustic bronze' finish, blends in beautifully with the colours and textures of natural surroundings. Each solid brass spikelight has a decorative bespoke feel, with darker and lighter elements of the rustic finish appearing in slightly different areas and patterns. This adds to their classic, high-end quality.
These solid brass garden spikelights accommodate replaceable LED GU10 bulbs which will last for a very long time compared with halogen lamps, meaning less maintenance, less cost and more reliability. The LED GU10 bulbs are available in warm or cool white in two different beam angles, so that you have more choice over the desired lighting effects in your own garden !
The Smartspike 60 is supplied with either 2m or 5m of 3 core H05RNF cable (approx.). The longer cable length means larger spaces can be left between each fitting when installing and also means less cable joins.
A number of alternative finishes are available, including Stainless Steel, Copper, Satin Silver and Black, as well as twin spike lights and a 12v version.
Choosing the style of a product is only part of the equation you must also think of where that product will be used and how it will be installed. All exterior lighting products on our web site have a IP rating which is explained further in our design ideas section but in simple terms the IP rating is appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation as the weakest point is always cable and transformer joints. All joint must be made 100% water tight and this can be done using heat shrink kits, waterproof junction boxes which are then filled with a resin mix. All joints where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially in clay based soil areas. If possible use ground surface spike lights rather than a buried light. Mains 240v cable will have less joints than a low voltage installation but care must be taken with the cable runs.
All exterior lights must be installed by a certified NIC EIC electrician and should be signed off by an electrician with Part P certification. all cable joints must be 100% watertight. There are a selection of waterproof jointing kits and boxes available on this web site.
The amount of light that is produced by a lamp is called lumens and the more lumens the lamp has the brighter it will be. Lumens work in conjunction with kelvins and should not be taken in isolation of each other. For example if you had a very warm white lamp at 2,700 kelvins and it produced 300 lumens and you then had another lamp which was a cool white 6,000 kelvins which also produced 300 lumens the cooler lamp colour would always appear brighter to the naked eye than the warmer one this is due to the receptors in the eye that react better to a white light spectrum. Another factor on how bright a light may appear is contrast. So if you shine a white 6,000 kelvin light onto a dark wall and a warm 2,700 Kelvin lamp onto a white wall the warmer lamp would appear brighter due to the contrast of the material it is focused on. So when choosing a lamp always take into account the area you want to illuminate and think about Kelvins (colour ), Lumens ( brightness) and contrast (colour of area).
The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins
which is in the warm colour spectrum and a lamp with 6,000 kelvins would be at the very cold white spectrum. Getting
the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften skin tones and gives
a warm soft relaxed feel and at the other end of the scale a 4,000 to 6,000 kelvin lamp colour would be used in
offices or at fast food restaurants to make you feel less comfortable and relaxed and feel more alert. There’s nothing
that can sour your opinion of a compact fluorescent or LED lamp like buying a 4000K or 5000K bulb when you meant
to buy a 2700K bulb, or vice-versa. When you buy a new, energy efficient bulb, keep your application and colour scheme
in mind and make sure to buy the bulb with a colour temperature to match.
|Voltage:||220 - 240v|
|Max wattage:||35 Watt|
|IP rating:||IP 65|
|Materials:||Solid Brass (Rustic Bronze Finish) & Tempered Glass|
|Suggested accessories:||250mm Extension rod not included, 250mm Extension rod included|
|Dimensions:||110mm x 60mm|
|cabling:||2m of H05RNF cable, 5m of H05RNF cable|
|Ground spike dimensions:||Spike Length: 250mm approx.|