01689 606342

The Tuscana is a die cast aluminium alloy guide fitting, finished with textured matt white paint. This square wall light is also available in round and white

  • Complete with fixing accessories
  • Textured matt black paint & opal pc
  • Constructed from die cast aluminium alloy & polycarbonate
  • Complete with LED driver
  • 9W LED module (SMD 5630) Warm White (Included)
  • K: 3000 Lm: 850 Lm/W: 94
  • IP44
  • Proj: 36mm Sq: 215mm
  • Class 1
  • 5 Years Warranty
  • Weight: 0.969 Kg


Choosing the style of a product is only part of the equation you must also think of where that product will be used and how it will be installed. All exterior lighting products on our web site have a IP rating which is explained further in our design ideas section but in simple terms the IP rating is appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation as the weakest point is always cable and transformer joints. All joint must be made 100% water tight and this can be done using heat shrink kits, waterproof junction boxes which are then filled with a resin mix. All joints where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially in clay based soil areas. If possible use ground surface spike lights rather than a buried light.  Mains 240v cable will have less joint than a low voltage installation but care must be taken with the cable runs.

A guide to lighting steps

As a general rule the steps are marked every other tread as per the illustration below. The other reason is the surface you are illuminating is very dark and tends to suck the light in. A cool white lamp is required on very dark colours where a warm white lamp works better on sandstone and light grey finishes.

Lamp colour ( Kelvins )

Lamp colour is determined by the Kelvins and a lamp which is  2700 kelvin  is classed as warm white and sympathetic to skin tones and warm brickwork. A kelvin of 6500k is in the  blueish white spectrum and works well against a white background and will appear brighter to the naked eye than the warm colour spectrum.