01689 606342

The Wise Box Version 2 Kit is an updated version of the original Wise Box Kit. Version 2 features four PIR timer dials for each circuit, allowing up to 16 PIR's to be connected.

The Version 2 kit also includes a 4 button Ilike keyfob and a 4 button Intense wall switch.

The Wisebox unit will control your lights, water features, electric shutters and gates etc. Once programmed, place the indoor wireless switch in a suitable location and the installation is complete. Enjoy switching your circuits from anywhere in your garden or home with the remote control.

The WiseBox Kit has a receiver that has four x 10 amp circuits with a maximum amperage of 20 amps. The WiseBox kit has a 200 metre range. These circuits can be changed from switching to an open circuit. Each circuit on the WiseBox is fused individually with a 10 amp fuse to protect all the circuits.

Programming Options

Option 1

Single Button On and Off
Programming this way will create an on and off from a single button on a wireless switch / remote.

Option 2

Dual button On and Off
Programming this way will assign your On and Off to 2 separate buttons.

Option 3

PIR / Timelag function
Programming this way only sends an ON signal, which is then switched off by a pre-set countdown timer. If you program to a PIR, then the PIR will reset itself to the pre-set time every time the sensor is triggered. If programmed to a switch or remote, then the countdown will switch off when it reaches 0 seconds.

Wise Switches / Remotes

The keyfob and the wall switch included within the kit both have four buttons. Once you have programmed the button of your choice to link with a channel, that button will switch the channels circuit on / off.You can add additional switches and remotes to a WiseBox if you wish, up to a maximum of 16


General Detection Range 200m
IP Rating IP54 - Protection from the amount of dust that would interfere with the operation of the equipment. Protection from splashed water.
Dimensions Depth 80mm Height 184mm Width 200mm
Electrical Amperage 20A Maximum Amps / Circuit 10A Minimum Wattage per Circuit 1W Voltage 240V