01689 606342

Adjust, round, ( METAL HALIDE ) 70W, Adjustable 15 Degree tilt, very strong 5 ton load, IP67, 304 stainless steel


A very strong maximum 5 ton load can be put on the fitting and make it ideal as a drive over luminaire. 306 Stainless steel. The overall depth required is only 220 mm ideal for where space is at a premium. 15 Degree of tilt is available to ensure the light falls where you need it most.

Symmetric  means the lamp is set to the centre of the light fitting and throws the light  directly at the object for illumination.Ideal at a base of a tree to illuminate the canopy or to illuminate a fa├žade of a building.


                          Example of symmetric and asymmetric beam distribution


                              



Lamp details

Metal halide bulb 70W CDM-T, G12, NDL, 105mm

Metal halide lights are very punchy and last a long time. They do not like to be switched on and of constantly as they need to cool down between re strike. warm white 2,700 kelvins and cool white 4,000 kelvins are available


Example of kelvin colours

                             


  Installation tips

All recessed luminaries must have adequate drainage beneath each fitting to allow water to disperse, especially in clay based soil beds. All cable joint must be 100% watertight and there a number or waterproof transformer boxes and heat shrink cable joint kits on our web site to choose from. We would advise that all connections and transformer be kept above ground where possible as the weakest link in any exterior garden electrical installation is joining cables together.

If you feel that adequate drainage may be an issue then we would advise using a surface mounted spike light and keep all joints above ground. The Apollo range of light fittings has a choice of beam angles and glare shield options and can be found at the bottom of the surface ground lights section.

Please ensure that your electrician is NIC EIC certified and has done exterior lighting installations before.

  Features

The installation pot is included
Maximum load: 5 tons
Including a built-in conventional ballast
IP67
304 stainless steel

Item Specifications

colour: stainless steel
Lamp base: G12
Lamp description: HQI-T / CDM-T 70 Watt
Cut out: dia 26 cm
Installation depth: 22 cm
Overall diameter: 26.5 cm
Weight: 5.140 kg
Voltage: 230 Volt
Max wattage: 70 Watt
IP rating: IP 67
Materials: aluminium / stainless steel 304
Suggested lamp: 507130
Degree of tilt: 15