01689 606342

Belle, 12V, adjustable spike spread light, brass

12V Path Light / Garden Light

The Belle is a 12v Spread light with a difference. A secure serrated clamp joint enables the head to be adjusted and angled in various directions, a lot like a spot light, ideal as a path light or for lighting areas of low planting. It is made from solid brass with a brushed bronze finish, which enables it to blend into a garden environment. The underside of the shade has a white powder coated finish which acts as a reflector, as well as a clear domed diffuser, together enhancing the light emitted and directing all light downwards and outwards - spread light, down lighting, and spot lighting in one. A four fin polycarbonate ground spike with anchor is supplied as standard with the fitting for easy mounting into soft ground, although our Charleston Brass Spike could also be used if preferred.

A G4 LED capsule is available below (optional), which is the perfect replacement for 12v halogen G4 lamps, as they use far less energy and have a longer lifespan.
LED lamps offer energy savings over the traditional halogen  lamps and are also cool to touch and safe around children. Warm white and cool white are available and the cool white works well when illuminating shrubs and trees where as the warm white works better on brickwork and wood.

80% Typical energy savings using LED lamps

Low voltage is the safer option in the garden due to the ground being dug etc. You will need to use a transformer which matches the lamp voltage, for example if you had 6 fittings each with a MR16 35w lamp that would be 6 x 35w = 210 watts so you would need a transformer that was about 250 va as you need some spare capacity on it to function correctly. Standard MR16 low voltage lamps can use either an electronic or standard toroidal type transformer but if you decide to use LED lamps then they work best on the toroidal type transformer.

We recommend you use the heat shrink kits for cable jointing and also waterproof enclosures with the hard setting resin compound to minimise the risk of water ingress.

Please try and make all terminations above ground where there is less chance of water ingress. All installations should be done by a NIC EIC electrical contractor to ensure a safe and 100% water tight installation. Waterproof joint kits and boxes are available from our web site.

Example of transformer loadings



2 mt 2 core 0.75 cable included
G4 20w MAX
Ground spike included

Item Specifications

colour: Brass
Adjustable: Yes
Voltage: 12 Volt
Max wattage: 20 Watt
IP rating: IP 54
Height: 550mm
Finish: brass
Bulb Category Primary: Low voltage halogen
Bulb Type: Low voltage halogen
diameter: 135mm