01689 606342

Brick LED Downunder, silver grey, warm white, 3,000 kelvin, 110 lumen's, IP54, 1.4w, mains 240v


This recessed modern contemporary styled mains cool white LED recessed low level wall light can be used around low level perimeter walls, staircases or as a step light. Easy to install due to its built in  LED lamps and mains 240v supply. The light fitting is designed to throw the light down and forward and with the main lamp source set high in the fitting there is no glare created. LED lamps are cool to touch and safe around children they also have long life span and very ECO friendly due to their low running and maintenance cost's. This wall light is available in a number two LED lamp options , warm white and cool white. All options are non dimmable. We recommend placing them every third stair tread  and about 300mm above the tread. There is a mounting pot included with the light fitting that can be cut into the wall.   

Made from aluminium and equipped with powerful SMD LED recessed wall luminaire with indirect, glare-free light output. Rated IP54 it is suitable for outdoor use. y. For simplified mounting, a suitable installation housing is included. This luminaire contains built-in LED lamps. EEC: A - A++. The lamps cannot be changed in the luminaire.

Installation 

Choosing the style of a product is only part of the equation you must also think of where that product will be used and how it will be installed. All exterior lighting products on our web site have a IP rating which is explained further in our design ideas section but in simple terms the IP rating is appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation as the weakest point is always cable joints. All joints must be made 100% water tight and this can be done using heat shrink kits, waterproof junction boxes which are then filled with a resin mix or magic gel. All joints where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially in clay based soil areas.

 

          A guide to lighting steps             

            

                

Lamp colour ( Kelvin's )


The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften the tone of the area and gives a warm soft relaxed feel and ideal for colourful flower beds and rockery areas especially with wooden bark and at the other end of the scale a 4,000 to 5,000 kelvin lamp colour would be used against a light background such as white walls or to accentuate grey blueish foliage in shrubs and small trees.  When you buy a new, energy efficient bulb, keep your application and colour scheme in mind and make sure to buy the bulb with a colour temperature to match. n>

   Colour temperature chart


 

Light output ( Lumen's )

The amount of light that is produced by a lamp is called lumen's and the more lumen's the lamp has the brighter it will be. Lumen's work in conjunction with kelvins and should not be taken in isolation of each other, for example if you had a very warm white lamp at 2,700 kelvins and it produced 300 lumen's and you then had another lamp which was a cool white 5,000 kelvins which also produced 300 lumen's the cooler lamp colour would always appear brighter to the naked eye than the warmer one this is due to the receptorsin the eye that react better to a white light spectrum. Another factor on how bright a light may appear is contrast so if you shine a white 5,000 kelvin light on to a dark wall and a warm 2,700 kelvin lamp on to a white wall the warmer lamp would appear brighter due to the contrast of the material it is focused on. So when choosing a lamp always take in to account the area you want to illuminate and think about Kelvins ( colour ),  Lumen's ( brightness) and contrast  ( colour of area ) .


Item Specifications

colour: Silver Grey
Lamp description: 18 LED's
Cut out: 10 x 16 cm
Installation depth: 7.5 cm
Weight: 0.700 kg
Voltage: 230 Volt
Max wattage: 6 Watt
IP rating: IP 54
Materials: aluminium
Width: 17 cm
Height: 10.5 cm
Depth: 7 cm
Bulb Type: LED
colour temperature: 3000 Kelvin, 6500 Kelvin