01689 606342

BRICK outdoor recessed wall light, LED, 3000K, stainless steel, 230V, IP67, 850lm

With the BRICK LED recessed wall light, which is made of stainless steel and aluminium, the built-in LEDs are covered by a glass sheet. The built-in reflector means that the light is output asymmetrically. The functional luminaire is connected directly to the 230V mains supply. With IP65 protection class, the luminaire is suitable for outdoor use. A mounting pot is included in the delivery for simple assembly. This luminaire contains built-in LED lamps. EEI: A - A++. The lamps in the luminaire cannot be replaced unless by the manufacturer or a service technician authorised by them.

Asymmetric medium beam distribution which means that most of the light does not get thrown backwards but is projected forward and down.

Symmetric is a standard type of light fitting and means the lamp is set to the centre of the light fitting ( see example below ) and throws the light directly at the object for illumination but lots of the light also gets wasted into the air and may create some light pollution.


Lamp colour ( Kelvins )


The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften the tone of the area and gives a warm soft relaxed feel and ideal for colourful flower beds and rockery areas especially with wooden bark and at the other end of the scale a 4,000 to 5,000 kelvin lamp colour would be used against a light background such as white walls or to accentuate grey blueish foliage in shrubs and small trees.  When you buy a new, energy efficient bulb, keep your application and colour scheme in mind and make sure to buy the bulb with a colour temperature to match. 

Light output ( Lumens )

The amount of light that is produced by a lamp is called lumens and the more lumens the lamp has the brighter it will be. Lumens work in conjunction with kelvins and should not be taken in isolation of each other, for example if you had a very warm white lamp at 2,700 kelvins and it produced 300 lumens and you then had another lamp which was a cool white 5,000 kelvins which also produced 300 lumens the cooler lamp colour would always appear brighter to the naked eye than the warmer one this is due to the receptors in the eye that react better to a white light spectrum. Another factor on how bright a light may appear is contrast so if you shine a white 5,000 kelvin light onto a dark wall and a warm 2,700 kelvin lamp onto a white wall the warmer lamp would appear brighter due to the contrast of the material it is focused on. So when choosing a lamp always take into account the area you want to illuminate and think about Kelvins ( colour ),  Lumens ( brightness) and contrast   ( colour of area ) .

Item Specifications

Beam Angle: asymmetrical, symmetrical
colour: stainless steel 316
Installation depth: 10.3cm
Weight: 1.842 kg
Voltage: 220 - 240v
IP rating: IP 65
Length: 21cm
Width: 9.1cm
Depth: 9.3cm
Lumens: 950 Lumens
lamp life: 25000 hours
colour temperature: 3000k Warm White
Class: Class 1
installation length: 19.6cm