01689 606342

Compact spike light, Green powder coat, 12v, MR16 lamp, IP65

E4141 Elipta Compact Spike Spotlight is an adjustable 12v spike spotlight typically used for garden lighting tasks such as spotlighting focal points, up lighting small trees with 50w 36° halogen lamp and shrub border lighting using a 50w 60° lamp. With a 20 watt lamp they can be used to up light pergola columns or to accent light small light coloured focal points. Fitting 35w lamps makes these outdoor spotlights ideal for up lighting newly planted borders or individual feature plants. It’s smart green powder coat construction is a popular choice for area where the light blends in naturally to the garden settings. It has a flush lens which sheds water and leaf litter and is easy to clean. Low energy options include warm white led lamps for lighting smaller subjects and a blue led module for coloured accenting of glass, stainless steel and other modern materials. Buy a few spare lamps to have some handy when you need a replacement, or buy a few different wattages and beam angles to experiment with creative garden lighting effects. The optional Rotashield stainless steel glare shield replaces the front bezel for situations where glare control ids required near paths, windows or terraces. Pre flexed with 1.5m 2 core cable

Ideal to spot light items of interest in the garden like small shrubs, ornaments, trees and pathways. Can be used on the wall without the spike to illuminate a garden patio area or BBQ.

This item has a very high IP rating which makes it very safe near water.

Typical LED energy savings


Care must be taken when installing exterior lighting products especially ground buried lights.. All the products are sold fit for purpose and tested  before given an IP rating. More details on IP ratings can be found under design ideas section. The weakest point is generally the installation of the product where adequate drainage has not been made for ground buried lights or poor cable joints have been made which are not 100% water tight and will allow water to penetrate weak joints.. There are a number of waterproof enclosures available on this site along with heat shrink cable joint kits and resin gel packs to fill the junction boxes and make a watertight enclosure. Where possible try and keep all joints and transformers above ground, however if this is not possible there are potted burial kits available.

Example of how to load a transformer

Lamp colour ( Kelvins )

Lamp colour is determined by the Kelvins and a lamp which is  2,700 kelvins  is classed as warm white and is sympathetic to skin tones and warm brickwork. A lamp with a kelvin of 6500 is in the  cold blueish white spectrum and works well against a white background and will appear brighter to the naked eye than the warmer colour spectrum. 

Light output ( Lumen's )

All lamps have a lumen number and the higher the lumen number the brighter the lamp, however colour of the lamp (kelvins ) also comes in to play here as a whiter lamp at 6,000 kelvins and above would always appear brighter to the naked eye than a warmer colour lamp at the 2,700 kelvins light spectrum even if it has the same lumen output.  A halogen 150w R7 lamp that is used in a standard garden security flood light would produce around 2,300 lumen's and a 26w compact fluorescent would produce around 1,800 lumen's.  Placing lights closer to the item to be illuminated is a good way of using a lower lumen lamp rather than trying to flood light a big area.


Environmental impact

Care should be taken for the environment and local wildlife to maintain the ecological balance. Insects, bats, wildlife can all be effected by  light pollution. The warmer colour spectrum of  ( 2,700 Kelvins ) does not interfere with insects and general wildlife as much as the blue colour spectrum of light around 6,000 kelvins which can disrupt their normal night time activity. This also applies to bats where a anti glare light fittings works better as well as reducing the overall light pollution in the area. You must also be mindful of your neighbours and the effect your lighting can have on them and shining a 500w tungsten halogen flood light in to their windows at night will cause them distress. Try to keep the light in a downward position and local to the items you want to illuminate and even if you want to illuminate tall trees it can be done in a sympathetic way by placing a ground buried or surface spike flood light directly under the trees to illuminate the canopy. Some light fittings also have a anti glare shield fitted to reduce light pollution.

IP Rating

All the luminaries on our web site have been specifically designed fit for purpose and assigned a relevant IP rating which denotes the amount of protection that is required from water and dust. More information on IP ratings can be found in the design ideas section on this web site.



Suitable for use with energy compatible LED lamps
Fully adjustable, concentrate the light where you need it most
90 degree tilt
Pre flexed with 1.5m 2 core cable
Powder coat

Item Specifications

colour: stainless steel, Green, black, Natural Copper, Rustic Brown
Voltage: 240 volt, 12 Volt