A very traditional style light fitting designed to fit in to your existing brickwork
for either low level drive way lights, step lights or just perimeter garden lighting
for a walkway. You also have the choice to use the anti glare grill if light pollution is an issue or leave the grill of for maximum light output. This light fitting is still much brighter than an integral LED brick light and it is easy to replace the lamp should it fail.
It is important that all exterior installations are carried out by a NIC EIC approved
electrical contractor and that all joint are made 100% watertight. Where possible
we recommend using a 12 v system and try to keep all transformers etc above ground,
this will reduce the risk of water ingress in to the wiring system. All the luminaries
are tested fit for purpose and the installation instructions should be adhered to.
Waterproof junction boxes and gels are available on this web site.
The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 6,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften skin tones and gives a warm soft relaxed feel and at the other end of the scale a 4,000 to 6,000 kelvin lamp colour would be used in offices or a fast food restaurants to make you feel less comfortable and relaxed and more alert. There’s nothing that can sour your opinion of a compact fluorescent or LED lamp like buying a 4000K or 5000K bulb when you meant to buy a 2700K bulb, or vice-versa. When you buy a new, energy efficient bulb, keep your application and colour scheme in mind and make sure to buy the bulb with a colour temperature to match.
The amount of light that is produced by a lamp is called lumen's and the more lumen's the lamp has the brighter it will be. Lumen's work in conjunction with kelvins and should not be taken in isolation of each other, for example if you had a very warm white lamp at 2,700 kelvins and it produced 300 lumen's and you then had another lamp which was a cool white 6,000 kelvins which also produced 300 lumen's the cooler lamp colour would always appear brighter to the naked eye than the warmer one this is due to the receptors in the eye that react better to a white light spectrum. Another factor on how bright a light may appear is contrast so if you shine a white 6,000 kelvin light on to a dark wall and a warm 2,700 kelvin lamp on to a white wall the warmer lamp would appear brighter due to the contrast of the material it is focused on. So when choosing a lamp always take in to account the area you want to illuminate and think about Kelvins ( colour ), Lumen's ( brightness) and contrast ( colour of area )
Low profile design is discreet and a choice of front grill
Powder coated finish & frosted glass
|Finish:||Matt black paint & frosted glass|
|Dimensions:||6mm projection x 91mm height x 237mm length|
|Energy Rating:||Energy efficient|
|Material:||Cast alloy & glass|
|Bulb Category Primary:||Fluorescent|
|Bulb Light Source Description:||1 x 13W G24d-1 PLC 2 pin|
|Benefit:||high light output Low profile design is discreet a, Lower maintenance costs Energy efficient product L|
|Feature:||Complete with fixing accessories Matt black paint|
|Technical:||Complete with integral magnetic ballast 1 x 13W G2|
|Control Gear Required:||Included|
|Control Gear Used:||Magnetic Ballast|
|Cutting Hole Shape:||Rectangle|
|Cutting Hole Size:||75 x 204|