01689 606342

Elipta, adjustable, compact twin wall spot light, copper, mains 240v, GU10

E4922 Elipta Compact twin wall garden spotlights are 240v models for twin 50w GU10 halogen reflector lamps as well as energy saving led modules and low energy compact fluorescent lamps (order lamps separately). MR16 clip-on honeycomb glare louvre, colour filter, or spread lens is optional. It has flush lenses which shed water and dirt and are easy to clean. Unscrewing the front bezel makes it easy to extract and change the lamp without tools. Natural copper weathers to a mottled brown finish which blends well with red brick and timber Compact twin wall spotlights are ideal for mounting above french windows with twin 20w halogen lamps or 7w compact fluorescent lamps to provide threshold lighting or down lighting patio areas from house walls with 2 x 35w halogen lamps or 9w compact fluorescent lamps from 3 metres and 2 x 50w lamps or 11w compact fluorescent lamps from 5 metres above ground. Compact wall spotlights may be dimmed with a standard wall dimmer switch if fitted with halogen lamps or dimmable 11w compact fluorescent lamp.

Solid metal spotlight bodies mount onto a central boss and gasketed back plate which incorporates terminal block connection space. Knuckle joints allow spotlamp adjustment in any combination of downward, upward or outward directions. The central boss revolves on the back plate and is secured by grub screws at the side for inconspicuous fixing combined with adjustable positioning.>

All outdoor lighting should be installed by a certified PART P,  NIC EIC electrical contractor to ensure a safe and water tight installation.


Back plate screws to wall: body mounts onto the back plate with discrete allen key grub screws at the side of the body for screwless frontal appearance. Body can be rotated on back plate before fully tightening grub screws to ensure fitting is installed level, or at any other angle required. Grommeted rear cable entry. Silicon seal back plate fixings.

Choosing the style of a product is only part of the equation you must also think of where that productwill be used and how it will be installed. All exterior lighting products on our web site have a IP rating which is explained further in our design ideas section but in simple terms the IP rating is appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation as the weakest point is always cable and transformer joints. All joint must be made 100% water tight and this can be done using heat shrink kits, waterproof junction boxes which are then filled with a resin mix. All joints where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially in clay based soil areas. If possible use ground surface spike lights rather than a buried light.  Mains 240v cable will have less joint than a low voltage installation but care must be taken with the cable runs.

Lamp colour ( Kelvins )

The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 6,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften skin tones and gives a warm soft relaxed feel and at the other end of the scale a 4,000 to 6,000 kelvin lamp colour  would be used in offices or a fast food restaurants to make you feel less comfortable and relaxed and more alert. There‚Äôs nothing that can sour your opinion of a compact fluorescent  or LED lamp like buying a 4000K or 5000K bulb when you meant to buy a 2700K bulb, or vice-versa. When you buy a new, energy efficient bulb, keep your application and colour scheme in mind and make sure to buy the bulb with a colour temperature to match.

Kelvin colour chart


Light output ( Lumen's )

The amount of light that is produced by a lamp is called lumen's and the more lumen's the lamp has the brighter it will be. Lumen's work in conjunction with kelvins and should not be taken in isolation of each other, for example if you had a very warm white lamp at 2,700 kelvins and it produced 300 lumen's and you then had another lamp which was a cool white 6,000 kelvins which also produced 300 lumen's the cooler lamp colour would always appear brighter to the naked eye than the warmer one this is due to the receptors in the eye that react better to a white light spectrum. Another factor on how bright a light may appear is contrast so if you shine a white 6,000 kelvin light on to a dark wall and a warm 2,700 kelvin lamp on to a white wall the warmer lamp would appear brighter due to the contrast of the material it is focused on. So when choosing a lamp always take in to account the area you want to illuminate and think about Kelvins ( colour ),  Lumen's ( brightness) and contrast  ( colour of area ) 

Energy efficient lamps

Choosing the right lamp is a combination of 3 main factors, Lumen's, Kelvins and efficiency. There are other factors but not so relevant for exterior lighting products.  Efficiency matters because you want the maximum light out put possible ( Lumen's ) from the minimum amounts of watts consumed. The latest LED technology and compact fluorescent lamps are amongst the most efficient you can buy today. An example would be to change a mains halogen GU10 35w lamp to a ECO friendly GU10 5w LED lamp. The same be done by changing the older GLS light bulb for a compact fluorescent lamp. Reduced energy bills with no loss of light output helps the environment and reduce your energy bills. 


IP Rating

All the luminaries on our web site have been specifically designed fit for purpose and assigned a relevant IP rating which denotes the amount of protection that is required from water and dust. More information on IP ratings can be found in the design ideas section on this web site.


solid copper body
Maximum lamp wattage 35w halogen GU10
LED GU10 lamps can also be used

There is space inside the spotlight body to fit a E4010 58mm honeycomb glare louvre or a clip-on MR16 spread

Item Specifications

colour: black, Natural Copper, Rustic Brown, stainless steel 316