01689 606342

This solid brass Eyelite Steplight with bronze finish is a smart 12v surface mount garden light ideal for lighting stepped areas, either mounted on walls next to steps, or on the steps themselves. It can also be used as a deck light. BUT NOT TO BE INSTALLED LYING FLAT.  The 'eye lid' design results in all light shining downwards, without glare, which makes it perfect for the function of lighting steps. A mirrored reflector inside the step light ensures all light is emitted outwards with a clear polycarbonate lens diffusing the light evenly. The Eyelite is both robust and stylish, with a high IP rating of IP65, and has no external screws; twisting securely on and off from the back. It can therefore be angled in various directions to provide unique lighting effects from the side. Like the Slatlite, this low voltage step light has a G4 fitting. An LED G4 capsule is recommended, and is available as an optional extra. The bright 12 volt LED G4 in cool white,or warm white which can be selected below, saves more energy and has a much longer life span than a standard halogen G4. Lumena G4 LED bulbs will work from a normal Halogen 12v A/C transformer so there is no need to buy a special LED "Driver".

A guide to lighting steps

Lamp colour ( Kelvins )

The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 6,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm coulour wavelength helps to soften skin tones and gives a warm soft relaxed feel and at the other end of the scale a 4,000 to 6,000 kelvin lamp colour  would be used in offices or a fast food restaurants to make you feel less comfortable and relaxed and more alert. There’s nothing that can sour your opinion of a compact fluorescent  or LED lamp like buying a 4000K or 5000K bulb when you meant to buy a 2700K bulb, or vice-versa. When you buy a new, energy efficient bulb, keep your application and color scheme in mind and make sure to buy the bulb with a color temperature to match. 

Light output ( Lumen's )

The amount of light that is produced by a lamp is called lumen's and the more lumen's the lamp has the brighter it will be. Lumens work in conjunction with kelvins and should not be taken in isolation of each other, for example if you had a very warm white lamp at 2,700 kelvins and it produced 300 lumen's and you then had another lamp which was a cool white 6,000 kelvins which also produced 300 lumens the cooler lamp colour would always appear brighter to the naked eye than the warmer one this is due to the receptors in the eye that react better to a white light spectrum. Another factor on how bright a light may appear is contrast so if you shine a white 6,000 kelvin light on to a dark wall and a warm 2,700 kelvin lamp on to a white wall the warmer lamp would appear brighter due to the contrast of the material it is focused on. So when choosing a lamp always take in to account the area you want to illuminate and think about Kelvins ( colour ),  Lumen's ( brightness) and contrast  ( colour of area )


The installation should be carried out by a NIC EIC electrical contractor who has experience in installing exterior lighting products.  the weakest part of an installation is where the cable joints are made. All joints need to be 100% watertight and joined by either heat shrink kits or waterproof enclosure boxes which can then be filled with magic gel solution.

Typical example of loading a 12v transformer

Item Specifications

colour: Rustic Bronze
Voltage: 12 Volt
Max wattage: G4 50w
IP rating: IP 65
Materials: Brass / Polycarbonate
Dimensions: (Diam.) 96mm x (Width) 48mm
Technical: 2 Core 0.75mm² H05RN-F Rubber Cable (1.5m)
Bulb Type: G4
addional information: Polycarbonate Lens and mirrored reflector