01689 606342


Professional Motion Sensor Bollard - Vandal Resistant

  • Height (choice):                   0.6m, 0.8m or 1m (above ground)
  • Colour (choice):                   Garden Green / Graphite Black
  • Head (choice):                     Dome / Pillar
  • Materials:                            Aluminium / Polycarbonate / Stainless Steel
  • IP Rating:                             IP65
  • Bulb Holder:                        ES / E27 Screw Cap
  • Max Wattage:                      70W
  • Mounting:                             In-Ground Tubular Root Mount System
  • Included:                              Instructions / Allen Key
  • Guarantee:                           Bollard = 7 Years / Bulb = 2 Years
  • Sensor:  PIR (Motion Sensor)
  • Detection Range:  > 6m (100ยบ )
  • Sensor Settings:  Photocell On/Off, Sensitivity (m), Time Delay
  • Time Adjustment:  5 secs, 10 secs, 1 min, 3 mins, 5 mins, 8 mins
  • Sensitivity Adjustment:  High / Low Sensitivity (detection range)
  • Switch on / off:  <10 lux - 2000 lux (varies depending on adjustable settings)


This professional Fortress design illuminated bollard with PIR motion sensor has a matte garden green or graphite black finish. There are 3 different heights available with a choice of 600mm, 800mm or 1000mm, with an option suitable for every application such as driveways, paths, car parks and sectioned areas. There are also two styles of head to choose from; a 'domed' top and a 'pillar' (flat) top. The louvered head providing 'anti-glare' and secure illumination.

The integral PIR sensor switches on the bollard light when movement is detected, then off again when the trigger is out of range. A small control box allows various setting to be adjusted, such as the time delay: 5 secs, 10 secs, 1 min, 3 mins and 5 mins, as well as the sensitivity of the sensor and a photocell, night only option.

PIR motion sensor lights are very energy efficient, only turning on when triggered and when light is required. They are ideal for adding security when houses are left unoccupied as any potential unwanted movement would cause the light to turn on. Our large range of pro bollard lighting is also ideal for use in more commercial and public areas such as car parks, especially when used with our super bright, high lumen output LED Bulb (See Commercial LED Bollards for more options).

The Professional 'In-Ground' Root Mount System is recommended for where extra security and permanence is important. Replacing the standard tubular body and mounting base, these root mount bollards are extended in length so that at least 40cm can be securely concreted in place without losing any height above ground. A strong mounting bar inside the tubular body acts as an anchor when set into concrete, whilst an optional secure cable outlet allows easy wiring after the bollard is fixed in place.

The head and 2.5mm thick extruded aluminium cylinder of the bollard light are created from heavy duty die-cast aluminium, and all external screws are security allen socket type made from stainless steel, resulting in a completely rustproof and non-corrosive product.


Bollard types and spacing


Bollard lights are available in a massive choice of styles, finish and lamp options. You need to think about how the light will be used for example a small garden pathway, the main driveway or to illuminate steps etc.  If you are within 20 km of the coast you should think about using the wooden bollards or marine grade 316 stainless steel. Some bollards have built in LED lamps  and they generally offer lower levels of light ( lumen's ) than say a compact fluorescent. Also if the lamp is an integral part of the bollard then it cannot be replaced if it fails in future so you will have to purchase a complete new bollard. There are bollards that use GU10 LED lamps and in this case can be changed for a ECO friendly GU10 LED lamp. The spacing of the bollards will depend on the lamp output, louvre design, height etc but a general rule of thumb would be no less than 3 meters and no more than 12 meters apart. The shorter distance would be for garden pathways and the longer distance for long driveways.

                                                  

Light output ( Lumens )

The amount of light that is produced by a lamp is called lumens and the more lumens the lamp has the brighter it will be. Lumens work in conjunction with kelvins and should not be taken in isolation of each other. For example if you had a very warm white lamp at 2,700 kelvins and it produced 300 lumens and you then had another lamp which was a cool white 6,000 kelvins which also produced 300 lumens the cooler lamp colour would always appear brighter to the naked eye than the warmer one this is due to the receptors in the eye that react better to a white light spectrum. Another factor on how bright a light may appear is contrast. So if you shine a white 6,000 kelvin light onto a dark wall and a warm 2,700 Kelvin lamp onto a white wall the warmer lamp would appear brighter due to the contrast of the material it is focused on. So when choosing a lamp always take into account the area you want to illuminate and think about Kelvins (colour ),  Lumens ( brightness) and contrast  (colour of area).


                        
 

Lamp colour ( Kelvins )



The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 6,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften skin tones and gives a warm soft relaxed feel and at the other end of the scale a 4,000 to 6,000 kelvin lamp colour  would be used in offices or at fast food restaurants to make you feel less comfortable and relaxed and feel more alert. There’s nothing that can sour your opinion of a compact fluorescent  or LED lamp like buying a 4000K or 5000K bulb when you meant to buy a 2700K bulb, or vice-versa. When you buy a new, energy efficient bulb, keep your application and colour scheme in mind and make sure to buy the bulb with a colour temperature to match. 



                                                 
 


Item Specifications

colour: Garden Green, Graphite Black
Lamp base: ES / E27 Screw Cap
Voltage: 220 - 240v
IP rating: IP 65
Materials: Aluminium / Polycarbonate / Stainless Steel
Height: 600mm above ground, 800mm above ground, 1000mm above ground
Guarantee: BOLLARDS - 7 Years / SENSOR - 2 Years
Head Choice: Domed Fortress, pillar Fortress