01689 606342

Hayz round IP67 0.45W daylight white

The Hayz LED guide light is manufactured from marine grade stainless steel, making this recessed fitting suitable for application in coastal environments. With an IP67 rating, this is assured for placement on walkways and decking areas
  • Manufactured from marine grade stainless steel
  • Complete with fixing accessories
  • Marine grade brushed stainless steel & frosted pc
  • Constructed from marine grade stainless steel (316l) & polycarbonate
  • Complete with integrated control gear
  • 0.45W LED module (SMD 3528) Daylight White (Included)
  • K: 6500 Lm: 55 Lm/W: 122
  • IP67
  • Proj: 3mm Dia: 62mm
  • Class 2
  • 5 Years Warranty
  • Weight: 0.304 Kg

Lamp colour ( Kelvins )


The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften the tone of the area and gives a warm soft relaxed feel and ideal for colourful flower beds and rockery areas especially with wooden bark and at the other end of the scale a 4,000 to 5,000 kelvin lamp colour would be used against a light background such as white walls or to accentuate grey blueish foliage in shrubs and small trees.  When you buy a new, energy efficient bulb, keep your application and colour scheme in mind and make sure to buy the bulb with a colour temperature to match. 


Existing fittings must be completely removed before installation of a new product. Before removing the existing fitting, carefully note the position of each set of wires. After deciding the layout of the light fittings, and the position of the junction box, ensure the cables are long enough to connect to the desired positions. Ensure that there is some slack cable to allow removal of the unit • Cut a 50mm diameter hole in the mounting surface. The hole must be at least 90mm deep to allow the product to sit properly. Take care not to damage any pipes or cables beneath the mounting surface. Ensure that adequate room is left for the cable. • Feed the cable of each unit through the mounting holes and check the fit of the unit in the hole. 

  This system contains non-replaceable parts and cannot be serviced. If damage occurs the part should be scrapped.

Item Specifications

colour: stainless steel 316
Cut out: 50mm
Weight: 0.304 Kg
Voltage: 240 volt
IP rating: IP 67
Dimensions: Proj: 3mm Dia: 62mm
Lumens: 55
Bulb Type: LED
watts: 0.45 watts
colour temperature: 6500 Kelvin
Guarantee: 5 Years