Care must be taken when installing exterior lighting products especially those that
are ground mounted. All the products are sold and tested fit for purpose and the
IP rating is set according to the design and purpose of the luminaire, more details
on IP ratings can be found under design ideas section. The weakest point is generally
the installation of the product where adequate drainage has not been made for ground
buried lights or poor cable joints have been made which are not 100% water tight
and will allow for water penetration. There are a number of waterproof enclosures
available on this site along with heat shrink cable joint kits and resin gel packs
to fill the junction boxes to make a watertight enclosure. Where possible try and
keep all joints and transformers above ground, however if this is not possible there
are potted burial kits available.
Lamp colour is determined by the Kelvins and a lamp which is 2700 kelvin
is classed as warm white and sympathetic to skin tones and warm brickwork. A kelvin
of 6500k is in the blueish white spectrum and works well against a white background
and will appear brighter to the naked eye than the warm colour spectrum.
All lamps have a lumen number and the higher the lumen number the brighter the lamp, however colour of the lamp (kelvins ) also comes in to play here as a whiter lamp at 6,000 kelvins and above would always appear brighter to the naked eye than a warmer colour lamp at the 2,700 kelvins light spectrum even if it has the same lumen output. A halogen 150w R7 lamp that is used in a standard garden security flood light would produce around 2,300 lumens and a 26w compact fluorescent would produce around 1,800 lumens. Placing lights closer to the item to be illuminated is a good way of using a lower lumen lamp rather than trying to flood light a big area.
Care should be taken for local wildlife, insects, and general light pollution, this means the warmer colour spectrum does not interfere with insects and general wildlife as much as the blue spectrum of light around 6,000 kelvins which can disrupt their normal night time activity. This also applies to bats where a anti glare light fittings works better as well as reducing overall light pollution in the area.
|colour:||stainless steel, titanium, black, Satin Silver, Natural Copper|
|Lamp base:||GU10 max 82mm|
|Lamp description:||2 x GU10 LED|
|Max wattage:||50 Watt|
|IP rating:||IP 65|
|Materials:||2.5mm anodised aluminium body and tempered glass diffusers|
|Suggested lamp:||LED GU10|
|Dimensions:||Dimensions (L) 210mm x (W) 80mm x (H) 58mm (Bracket: 67mm)|
|Material Finish:||Anodised Aluminium in Satin Silver|