LV-SS414R and LV-BL414R Range of lights
This is a round recessed light for floors/walls/steps or decks, Is IP68 rated and made from 316 Stainless Steel or Black Anodised aluminium which are Made to
order and designed and Manufactured in England locally to us with a lead time up to 3 weeks.
This small 50mm fitting has an integral high quality CREE LED chip and comes in warm white 2700k. Up to 2.4w, 140
lumens using a (constant current) LED driver, 350mA, 500mA or 700mA. Choice of beam angles. 1m cable and comes with a 5 year guarantee.
They are each British designed, manufactured and hand assembled as a recessed floor/wall/step or deck light and
machined from solid billets of 316L stainless steel or if in Black from machined from Billets of solid aluminium.
This lighting product has been designed for the up lighting of walls, pillars, and garden structures
and can be mounted as a hardscape product used for the lighting of steps or installed into lawn/soil
using the PVC mounting sleeve provided. It can also be used for universal design solutions within
This product has the choice of three light outputs from a constant current supply of either 350mA,
500mA or 700mA.
The minimum output @350mA is 80 lumens @1.2w.
The maximum output @700mA is 140 lumens @2.4w.
Choice of beam angles 10º, 18º, 32º or 47x8º elliptical.
Comes pre wired with 1m of 2 core HO5RN-F rubber cable and a 5 year guarantee.
This fitting is made to order and the lead time is approximately 3 weeks.
These products utilise integral chips from LED manufacturer CREE, with ‘BIN’ number 8B4. This ‘BIN’
number is a great advantage for professional designers as it gives them confidence is specifying a
particular range of products with complete colour consistency, and eliminates the visible shift in
colour which can be noticeable with poorer quality products placed in close proximity to one another.
Our high quality integral LED's have an extremely long life expectancy. At the end of the LED's life, or in the unlikely
event of a premature failure, the LED can be factory replaced for a small fee if out of guarantee.
All ground recessed luminaires must have adequate drainage beneath each fitting to allow water to disperse, especially in
clay based soil beds.
All cable joints must be 100% watertight and there are a number or waterproof transformer boxes
and heat shrink cable joint kits on our web site to choose from.
We would advise that all connections and transformers
be kept above ground where possible as the weakest link in any exterior garden
electrical installation is joining cables
together. Magic Gel should be used in the termination boxes to reduce the risk of water ingress.
Please ensure that your electrician is NIC EIC certified and has done exterior lighting installations before and conforms
to Part P certification. Never use PVC cable only Rubber cable to be used for installations.
Care should be taken for the environment and local wildlife to maintain the ecological balance. Insects, bats, wildlife can
all be effected by light pollution.
The warmer colour spectrum of ( 2,700 Kelvins ) does not interfere with
insects and general wildlife as much as the blue colour spectrum of light
around 6,000 kelvins which can disrupt their normal
night time activity. This also applies to bats where a anti glare light fittings
works better as well as reducing the overall
light pollution in the area.
IMPORTANT - WIRING TO BE IN SERIES