01689 606342

LV-SS806 & LV-BL806 Range of lights

LV Boarder/path light, IP68,316L stainless steel - and Black anodised aluminium
Made to order lead time up to 3 weeks.
Small 38mm round light designed, manufactured and hand assembled in England. Has an integral
high quality CREE LED chip and comes in warm white 2700k. Up to 2.4w, 140 lumens using a
(constant current) LED driver, 350mA, 500mA or 700mA. Choice of beam angles.
1m cable. 5 year guarantee.
British designed, manufactured and hand assembled solid bar stock316L stainless steel,
boarder/planter light.
This tiny fixture is for lighting shrubs,flower beds and paths and is secured with the insertion of the
three stainless steel spikes in to soil/lawn. Fully adjustable.
It has a choice of three light outputs from a constant current supply of either 350mA, 500mA or
700mA. The minimum output @350mA is 80 lumens @1.2w.
The maximum output @700mA is 140 lumens @2.4w.
Choice of beam angles 10º, 18º, 32º or 42º.
Comes pre wired with 1m of 2 core HO5RN-F rubber cable and a 5 year guarantee.
This fitting is made to order and the lead time is approximately 3 weeks.
Our products utilise integral chips from LED manufacturer CREE, with ‘BIN’ number 8B4. This ‘BIN’
number is a great advantage for professional designers as it gives them confidence is specifying a
particular range of products with complete colour consistency, and eliminates the visible shift in
colour which can be noticeable with poorer quality products placed in close pro
proximity to one another.

Our high quality integral LED's have an extremely long life expectancy. At the end of the LED's life, or in the unlikely event of a premature failure, the LED can be factory replaced for a small fee if out of guarantee.


All recessed luminaires must have adequate drainage beneath each fitting to allow water to disperse, especially in clay based soil beds.
All cable joints must be 100% watertight and there are a number or waterproof transformer boxes and heat shrink cable joint kits on our
web site to choose from.
We would advise that all connections and transformers be kept above ground where possible as the weakest link in any exterior
garden electrical installation is joining cables together. Magic Gel should be used in the termination boxes to reduce the risk of water ingress.
Please ensure that your electrician is NIC EIC certified and has done exterior lighting installations before and conforms to Part P certification.

Environmental impact

Care should be taken for the environment and local wildlife to maintain the ecological balance. Insects, bats, wildlife can all be effected by  light pollution. The warmer colour spectrum of  ( 2,700 Kelvins ) does not interfere with insects and general wildlife as much as the blue colour spectrum of light around 6,000 kelvins which can disrupt their normal night time activity. This also applies to bats where a anti glare light fittings works better as well as reducing the overall light pollution in the area. You must also be mindful of your neighbours and the effect your lighting can have on them and shining a 500w tungsten halogen flood light in to their windows at night will cause them distress. Try to keep the light in a downward position and local to the items you want to illuminate and even if you want to illuminate tall trees it can be done in a sympathetic way by placing a ground buried or surface spike flood light directly under the trees to illuminate the canopy. Some light fittings also have a anti glare shield fitted to reduce light pollution.


Item Specifications

Beam Angle: 18°, 10°, 32°, 42°
LED Colour: 2700K
Lamp description: CREE XP-E (integral LED - BIN Number 8B4)
Voltage: Constant Current using LED driver, 350mA, 500mA or 700mA
IP rating: IP 68
Materials: stainless steel 316, Black Anodised Aluminium
Dimensions: 300mm length from base of fitting to collar, 150mm triple spike, 77mm from collar to top of fitting
Dimmable: yes
cabling: 1m 2 core HO5RN-F rubber cable
Guarantee: 5 Year