Modula ground, 30 degree adjustable, up light, Square, 316 stainless steel, 12v, IP67
E8811N is a stylish 12v recessed up-light with a choice of 20-50w halogen lamp or low energy LED. lamp. The light is located
by an O ring on the body into a sleeve tube. To facilitate removal of screws for future re-lamping or other maintenance,
apply copper grease to the threads of all screws being fitted for retention of bezels, grills or other top plates or retaining
rings. Copper grease resists degradation due to heat and protects against difficulty in removing screws, particularly where
stainless steel screws are fitted with aluminium parts. It may also be used on screw threads of screw-off bezels or glare
shields. Ensure surplus is cleaned off with a solvent to prevent staining in use.
Colour/Finish: |
Stainless Steel finish blends well with modern materials and timber |
IP Rating: |
IP67 |
Construction: |
Front bezel is attached to tubular aluminium body. 1m cable via rear entry cable gland |
Input Voltage: |
12v |
Lamp Type: |
MR16 20w or 50w halogen lamps or MR16 L.E.D. lamps include white or warm white 3w or 5w; 50,000 life and
low energy consumption make them a popular option |
Installation: |
The plastic sleeve is built into the wall during construction or retrofitted into a hole cut with a coring
bit: the light pushes into the tube, where it is held firmly in place by an o-ring. Connect input cable
to cable from transformer using T9962 cable joint or T9963 cable splice kit. |
LED energy saving example

All recessed luminaires must have adequate drainage beneath each fitting to allow
water to disperse, especially in clay based soil beds. All cable joint must be100%
watertight and there a number or waterproof transformer boxes and heat shrink cable
joint kits on our web site to choose from. We would advise that all connections and
transformer be kept above ground where possible as the weakest link in any exterior
garden electrical installation is joining cables together.
Please ensure that your electrician is NIC EIC certified and has done exterior lighting
installations before.
Typical loading on a transformer

Colour/Finish316 stainless steel finish
IP ratingIP67
ConstructionFront bezel is attached to tubular aluminium body. 1m cable via rear entry cable gland
Input voltage12v
Lamp typeMR16
20w or 50w halogen lamp or MR16 LED modules include white or warm white
3w or 5w; 50,000 life and low energy consumption make them a popular
option
InstallationThere is space inside the
body to fit a clip-on MR16 spread lens or colour filter accessory onto
the front of the lamp. E8700FLN Modula frosted lens may be fitted for
softer, more diffused lighting effects
AccessoriesThere
is space inside the body to fit a clip-on MR16 spread lens or colour
filter accessory onto the front of the lamp. E8700FLN Modula frosted
lens may be fitted for softer, more diffused lighting.