01689 606342

Pagoda lantern with integral LEDs, IP44, with photocell and PIR, requires E27 lamp


Twin lamp and twin detection


The Pagoda is an exterior PIR wall light, stylishly designed to look great in any modern environment. Suitable for use in both domestic and commercial environments.

With the integral PIR the pagoda wall light with an E27 bulbs inserted will instantly come on when someone is in its detection range when it is dark making for a safe welcome approach to your house on dark evenings.  There is also a built in photocell which operates the circular ring of small SMD LED lamps, these come on automatically when dusk falls and can be seen from a distance in a cool white halo of light.  Because of the style of shade the light will be thrown in all directions to illuminate both the floor and walls. Fitting comes with LED module for the Photocell function but you will need to order the GLS LED lamp to operate the main fitting and for the PIR to function with it. See bottom of the page for the lamp options.

                  


              

Lamp colour ( Kelvins )

Lamp colour is determined by the Kelvins and a lamp which is  2,700 kelvins  is classed as warm white and is sympathetic to skin tones and warm brickwork. A lamp with a kelvin of 6500 is in the  cold blueish white spectrum and works well against a white background and will appear brighter to the naked eye than the warmer colour spectrum.



Light output ( Lumen's )

The amount of light that is produced by a lamp is called lumen's and the more lumen's the lamp has the brighter it will be. Lumen's work in conjunction with kelvins and should not be taken in isolation of each other, for example if you had a very warm white lamp at 2,700 kelvins and it produced 300 lumen's and you then had another lamp which was a cool white 5,000 kelvins which also produced 300 lumen's the cooler lamp colour would always appear brighter to the naked eye than the warmer one this is due to the receptors in the eye that react better to a white light spectrum. Another factor on how bright a light may appear is contrast so if you shine a white 5,000 kelvin light onto a dark wall and a warm 2,700 kelvin lamp onto a white wall the warmer lamp would appear brighter due to the contrast of the material it is focused on. So when choosing a lamp always take into account the area you want to illuminate and think about Kelvins ( colour ),  Lumen's ( brightness) and contrast  ( colour of area ) .

Example of energy efficient lamps

Choosing the right lamp is a combination of 3 main factors, Lumen's, Kelvins and efficiency. Efficiency matters because you want the maximum light output possible ( Lumen's ) from the minimum amounts of watts consumed. The latest LED lamps will reduce energy bills with no loss of light output and helps the environment too. 



Item Specifications

colour: stainless steel
Lamp description: 9.2W LED E27 Warm White & 12 x 0.05W LED (Capsule) (Required)
Weight: 1.468 Kg
Voltage: 220 - 240v
IP rating: 44
Materials: Constructed from stainless steel (201) & polycarbonate
Dimensions: Proj: 215mm H: 335mm W: 172mm
Bulb Included: No
Dimmable: Non-dimmable
Benefit: high light output
Feature: 8m maximum range with a 5 sec - 5 min timer functi
Control Gear Used: Complete with LED driver
Sensor: photocell & PIR
Sensor_Description: 8m maximum range with a 5 sec - 5 min timer functi, 110 degree detection angle
Material Finish: Brushed stainless steel & frosted pc
Bulb Type: E27
Guarantee: 2 years
additional information: Complete with built in PIR and Photocell