01689 606342

  Palin up/down light IP44 35W - copper lacquer


The Palin is an affordable range of exterior wall lights available in a choice of single or twin options finished in a copper tint lacquer. Suitable for use with energy compatible lamps and other finish options also available

  • Compatible with LED lamps
  • Suitable for indoor or outdoor use
  • Dimmable
  • Complete with fixing accessories
  • Copper lacquer & clear glass
  • Constructed from stainless steel (201) & glass
  • 2 x max 35W GU10 reflector (Required). Preferably use LED GU10 
  • IP44
  • Proj: 95mm H: 156mm W: 85mm
  • Class 1
  • 2 Years Warranty
  • Weight: 0.864 Kg

A wide selection of beam angles are available for the lamps to create the effect you require and can be used with the very latest LED lamps to help reduce maintenance cost's and energy bills.


LED energy saving example






Installation

All exterior lighting products on our web site have an IP rating which is explained further in our design ideas section but in simple terms the IP rating is appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation as the weakest point is always cable joints. All joints must be made 100% water tight and this can be done using IP68 inline connectors, waterproof junction boxes which are then filled with a resin or gel mix. 


All exterior lights must be installed by a certified NIC EIC electrician and should be signed off by an electrician with Part P certification. 

H07RN-F H07 3 Core Rubber Sheathed Mains Cable 1.5mm is recommended but do not use PVC flex cable as this is a poor connection for the cable glands and will lead to capillary action.

Lamp colour ( Kelvins )

Lamp colour is determined by the Kelvins and a lamp which is  2700 kelvin  is classed as warm white and sympathetic to skin tones and warm brickwork. A kelvin of 6500k is in the  blueish white spectrum and works well against a white background and will appear brighter to the naked eye than the warm colour spectrum.

                                                                



Light output ( Lumen's )


The amount of light that is produced by a lamp is called lumen's and the more lumen's the lamp has the brighter it will be. Lumen's work in conjunction with kelvins and should not be taken in isolation of each other, for example if you had a very warm white lamp at 2,700 kelvins and it produced 300 lumen's and you then had another lamp which was a cool white 5,000 kelvins which also produced 300 lumen's the cooler lamp colour would always appear brighter to the naked eye than the warmer one this is due to the receptors in the eye that react better to a white light spectrum. Another factor on how bright a light may appear is contrast so if you shine a white 5,000 kelvin light onto a dark wall and a warm 2,700 kelvin lamp onto a white wall the warmer lamp would appear brighter due to the contrast of the material it is focused on. So when choosing a lamp always take into account the area you want to illuminate and think about Kelvins ( colour ),  Lumen's ( brightness) and contrast  ( colour of area ) .      

 


    


Item Specifications

colour: Copper plated
Weight: 0.864 Kg
Voltage: 220 - 240v
IP rating: IP 44
Materials: Constructed from stainless steel (201) & glass
Suggested lamp: LED GU10
Dimensions: Proj: 95mm H: 156mm W: 85mm
Material Finish: Copper lacquer & clear glass
Bulb Type: 2 x GU10
Guarantee: 2 years
additional information: Complete with fixing accessories