E2536 is a compact 12v recessed garden lighting fitting for lighting across steps or wider staircases/patios according to the lamp type fitted. It is fully weatherproof for use in retaining walls and other damp locations. The eyelid hood hides the light source from a casual downward glance. E2536 eyelid steplight is a versatile light for other garden lighting applications too. With a frosted lens and low power 20w lamp it is a way of lighting around a patio area from flanking walls or raised beds. It can be used in locations requiring a splashproof fitting, such as water staircases, and around pond areas. MR16 warm white LED modules include 3w or 5w for lighting across wider steps; 50,000 life and low energy consumption make them a popular option. Remember that these are, in effect, recessed spotlights: do not use them facing seating areas, windows or doors to avoid glare; use downward facing steplights such as E2161 Pilot surface mount steplight instead.
All recessed luminaires must have adequate drainage beneath each fitting to allow
water to disperse. All cable joint must be 100% watertight and there a number
or waterproof transformer boxes and heat shrink cable joint kits on our web site
to choose from. We would advise that all connections and transformer be kept above
ground where possible as the weakest link in any exterior garden electrical installation
is joining cables together.
Please ensure that your electrician is NIC EIC certified and has done exterior lighting
installations before. Also ensure that all rubber gaskets are clean and dry before
screwing down the front glass and bezel for a water tight seal.
Powder coated black
The powder coat is a protective paint finish that will not tarnish
Pressure die-cast brass body with powder coated black eye-lid front plate, stainless steel front plate screws and clear lens. Pre-wired with 6m cable.
12 volts requires power from a remote transformer
MR16 12v tungsten halogen reflector lamp or MR16 led modules. Order lamp separately
Connection direct to transformer or of fitted cable to low voltage supply cable by crimped heat shrink joint if cable longer than 6m is required. (order cable joint kit T9962 separately if required). Should be fixed in wall with mortar for good heat dissipation; do not use expanding foam fixatives which insulate the fitting and reduce heat disspation. Does not need to be removed from the wall for lamp replacement
Use E2500F flush frosted lens to diffuse lighting around patio areas; MR16-A-HL clip-on honeycomb glare filter is also recommended as a means of reducing glare near viewpoints.