The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 6,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften skin tones and gives a warm soft relaxed feel and at the other end of the scale a 4,000 to 6,000 kelvin lamp colour would beused in offices or a fast food restaurants to make you feel less comfortable and relaxed and more alert. There’s nothing that can sour your opinion of a compact fluorescent or LED lamp like buying a 4000K or 5000K bulb when you meant to buy a 2700K bulb, or vice-versa. When you buy a new, energy efficient bulb, keep your application and colour scheme in mind and make sure to buy the bulb with a colour temperature to match.
The amount of light that is produced by a lamp is called lumen's and the more lumen's the lamp has the brighter it will be. Lumen's work in conjunction with kelvins and should not be taken in isolation of each other, for example if you had a very warm white lamp at 2,700 kelvins and it produced 300 lumen's and you then had another lamp which was a cool white 6,000 kelvins which also produced 300 lumen's the cooler lamp colour would always appear brighter to the naked eye than the warmer one this is due to the receptors in the eye that react better to a white light spectrum. Another factor on how bright a light may appear is contrast so if you shine a white 6,000 kelvin light on to a dark wall and a warm 2,700 kelvin lamp on to a white wall the warmer lamp would appear brighter due to the contrast of the material it is focused on. So when choosing a lamp always take in to account the area you want to illuminate and think about Kelvins ( colour ), Lumen's ( brightness) and contrast ( colour of area )
First and foremost all new external electrical works must be installed by a PART P registered electrical contractor. The contractor must supply you with full certification once the work is completed. For a mains 240v supply they should use SWA ( steel wired armour ) cable. If a 12v low voltage system is being installed then flexible rubber round double insulated cable can be used ( NOT PVC CABLE ). Each new garden supply should also be on its own RCD. Cable should be buried to a safe depth to avoid any unnecessary risk due to garden forks or spades.
Equally as important and probably the weakest link in any exterior cable run is the joining of cables. Each joint will need to be 100% water tight and this can be achieved by the use of Magic Gel poured in to exterior weather-tight junction boxes once the termination is complete or you could use heat shrink kits. See FIG 1 and FIG 2 below. Burial resin mixes are also available to use in weatherproof junction boxes and this product sets to a very hard resin and not ideal if you need to get the a joint later on, but ideal as a permanent water tight fix. Where possible try and keep all low voltage transformers and joint boxes above ground, this will reduce the risk of water ingress.
|Product Type:||Non Automatic|
|Finish:||Brushed stainless steel & clear PC|
|Dimensions:||190mm height x 118mm projection x 76mm width|
|Energy Rating:||Energy efficient|
|Material:||Metal & plastic|
|Bulb Category Primary:||LED|
|Bulb Light Source Description:||3.6W Capsule 5mm Daylight (30 LED's)|
|Benefit:||Low maintenance costs Energy efficient product LED, high light output|
|Feature:||Lamp included Complete with fixing accessories Bru|
|Technical:||Complete with integrated control gear 3.6W Capsule|
|Control Gear Required:||Included|
|Control Gear Used:||Integrated|