01689 606342


QUADMARKA – 240V 4 WAY RECESSED GROUND / STEP LIGHT – NATURAL COPPER


The QuadMarka has two conical sections on one side of the top of the fitting, which allows a 360º diffusion of light through a clear lens, without glare. The slightly domed surface makes this the ideal shape for mounting on decking, a patio or any other areas where a walk over facility is required. The front bezel is threaded, and attaches to a copper body by screwing together with no external screws or fixings which results in a neater overall finish. This also means no tools are required to change the GU10 lamp (LED recommended).

The robust black plastic sleeve is supplied to protect the copper and assist with installation. The sleeving should be built into the wall during construction or retrofitted into a drilled out hole. The main part of the light then pushes into the tube, where it is held firmly in place, leaving only the streamline front dome on show.

The QuadMarka is supplied with approx. 3m of 3 core H05RNF cable. This longer cable length gives the option of a 6m space between two lights should it be needed, and could cut down the number of cable joins in outdoor lighting installation. Light can also be spread to a wider area with longer cable length.

Not to be driven over. 

Please note: This fitting must be installed with the mounting sleeve and additional rubber seal. If the sleeving and seal is not used, the Guarantee will be void. Not for use in areas prone to water-logging or flooding.


Lamp colour ( Kelvins )


The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften the tone of the area and gives a warm soft relaxed feel and ideal for colourful flower beds and rockery areas especially with wooden bark and at the other end of the scale a 4,000 to 5,000 kelvin lamp colour would be used against a light background such as white walls or to accentuate grey blueish foliage in shrubs and small trees.  When you buy a new, energy efficient bulb, keep your application and colour scheme in mind and make sure to buy the bulb with a colour temperature to match. 

                                                                 

Example of LED lamp energy savings






Item Specifications

Installation depth: 70mm
Voltage: 220 - 240v
Max wattage: 35 Watt
IP rating: IP 67
Materials: Durable Plastic, Natural Copper
Dimensions: Diam.) 90mm x (Length) 105mm
Material Finish: Natural Copper
Bulb Type: GU10
cabling: 3 Core H05RN-F Rubber Cable (3m)