Choosing the right lamp is a combination of 3 main factors, Lumen's, Kelvins and
efficiency. Efficiency matters because you want the maximum light out put possible (Lumen's )
from the minimum amounts of watts consumed. Kelvins are the colour temperature of the lamp. 2700k is the warm end of the colour spectrum and 5000k is the cooler whiter
end of the colour spectrum. The latest LED technology lamps are amongst the most efficient you can buy today.
All exterior lighting products on our web site have an IP rating which is explained further in our design ideas section but in simple terms the IP rating is appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation as the weakest point is always cable joints. All joints must be made 100% water tight and this can be done using IP68 inline connectors, waterproof junction boxes which are then filled with a resin or gel mix. All joints where possible should be made above ground for easy access and reduced water ingress. H07RN-F H07 3 Core Rubber Sheathed Mains Cable 1.5mm is recommended but do not use PVC flex cable as this is a poor connection for the cable glands and will lead to capillary action.
|colour:||anthracite, Stone Grey|
|Lamp description:||2 x GX53, 1 x GX53|
|Max wattage:||9 Watt|
|IP rating:||IP 44|
|Materials:||aluminium / glass|
|Dimensions:||125mm H x 155mm D (Inc Bracket) x 100mm diameter|
|Material Finish:||stone Grey Aluminium powder coated|