01689 606342

Smart spike 60, 12v MR16, anodised cocoa

The Smart spike 60 Anodised spike light is a stylish quality built fully adjustable spot light, ideal for use in any garden or outdoor space to highlight, plants, trees or statues.

The high quality anodised body provides added durability to this IP65 outdoor spot light. The hard anodised coating makes this ground spike light highly weather resistant and rust proof. Comes complete with 2 mtrs of flex.

This fitting can also be used with an ECO friendly LED MR16 lamp if required.
LED lamps offer energy savings over the traditional halogen GU10 lamps and are also cool to touch and safe around children. Warm white and cool white are available and the cool white works well when illuminating shrubs and trees where as the warm white works better on brickwork and wood.

Typical energy savings using LED lamps

Four alternative colour finishes of the Smartspike 60 are also available: Black, Copper, Titanium and stainless steel.

Low voltage is the safer option in the garden due to the ground being dug etc. You will need to use a transformer which matches the lamp voltage, for example if you had 6 fittings each with a MR16 35w lamp that would be 6 x 35w = 210 watts so you would need a transformer that was about 250 va as you need some spare capacity on it to function correctly. Standard MR16 low voltage lamps can use either an electronic or standard toroidal type transformer but if you decide to use LED lamps then they work best on the toroidal type transformer.

We recommend you use the heat shrink kits for cable jointing and also waterproof enclosures with the hard setting resin compound to minimise the risk of water ingress.

Please try and make all terminations above ground where there is less chance of water ingress. All installations should be done by a NIC EIC electrical contractor to ensure a safe and 100% water tight installation. Waterproof joint kits and boxes are available from our web site.

Example of transformer loadings



Anodised aluminium
Fully adjustable
Mains 12v Low voltage
2mtr of flex

Item Specifications

Adjustable: Yes
Overall diameter: 60mm
Voltage: 12v
Max wattage: 50 Watt
IP rating: IP 65
Height: 606mm including spike
Degree of tilt: 90
Finish: Anodised
Bulb Category Primary: Low voltage halogen
Technical: complete with 2 mtr flex
Bulb Type: MR16