01689 606342

Tango, garden wall lantern style fitting, IP44, Compatible with Max 9.2w LED lamp

The Tango range of exterior garden lights has a modern design providing the perfect complement to any outdoor space. The wall light is diffused to minimize glare with the internal stainless louvre and scatter light out over all areas ideal for entrance porches. There are also two bollard lights to choose from to match with the wall light and keep a consistent theme in your lighting. Made from brushed stainless steel and with a clear outer lens for ease of cleaning.The Tango range is designed to be very low glare and sympathetic to the environment. The design of the louvre pushes the light down to where it is needed most. Lamp not included. See bottom of screen for lamp options.

                    Lamp lumen comparison


Lamp colour ( Kelvins )

Lamp colour is determined by the Kelvins and a lamp which is  2,700 kelvins  is classed as warm white and is sympathetic to skin tones and warm brickwork. A lamp with a kelvin of 6500 is in the  cold blueish white spectrum and works well against a white background and will appear brighter to the naked eye than the warmer colour spectrum.

Kelvin colour chart


Light output ( Lumen's )

All lamps have a lumen number and the higher the lumen number the brighter the lamp, however colour of the lamp (kelvins ) also comes in to play here as a whiter lamp at 6,000 kelvins and above would always appear brighter to the naked eye than a warmer colour lamp at the 2,700 kelvins light spectrum even if it has the same lumen output.  A halogen 150w R7 lamp that is used in a standard garden security flood light would produce around 2,300 lumen's and a 26w compact fluorescent would produce around 1,800 lumen's.  Placing lights closer to the item to be illuminated is a good way of using a lower lumen lamp rather than trying to flood light a big area.

Environmental impact

Care should be taken for the environment and local wildlife to maintain the ecological balance. Insects, bats, wildlife can all be effected by  light pollution. The warmer colour spectrum of ( 2,700 Kelvins ) does not interfere with insects and general wildlife as much as the blue colour spectrum of light around 6,000 kelvins which can disrupt their normal night time activity. This also applies to bats where a anti glare light fittings works better as well as reducing the overall light pollution in the area. You must also be mindful of your neighbors and the effect your lighting can have on them and shining a 500w tungsten halogen flood light in to their windows at night will cause them distress. Try to keep the light in a downward position and local to the items you want to illuminate and even if you want to illuminate tall trees it can be done in a sympathetic way by placing a ground buried or surface spike flood light directly under the trees to illuminate the canopy. Some light fittings also have a anti glare shield fitted to reduce light pollution.


Choosing the style of a product is only part of the equation you must also think of where that product will be used and how it will be installed. All exterior lighting products on our web site have a IP rating which is explained further in our design ideas section but in simple terms the IP rating is appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation as the weakest point is always cable and transformer joints. All joint must be made 100% water tight and this can be done using heat shrink kits, waterproof junction boxes which are then filled with a resin mix. All joints where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially in clay based soil areas. If possible use ground surface spike lights rather than a buried light.  Mains 240v cable will have less joint than a low voltage installation but care must be taken with the cable runs.

IP Rating

All the luminaries on our web site have been specifically designed fit for purpose and assigned a relevant IP rating which denotes the amount of protection that is required from water and dust. More information on IP ratings can be found in the design ideas section on this web site.


Lower maintenance costs
Low energy compact fluorescent lamp gives high light output and long life
Complete with fixing accessories
Brushed stainless steel & clear PC
Constructed from stainless steel & plastic
Very low glare design features

Item Specifications

Lamp description: 9.2W LED E27 Warm White (Required)
Weight: 1.019 Kg
Voltage: 240V
IP rating: 44
Materials: Constructed from stainless steel (201) & polycarbonate
Finish: Brushed stainless steel & clear PC
Dimensions: 260mm height x 160mm projection x 102mm width
Bulb Category Primary: Fluorescent
Bulb Included: No
Dimmable: Non-dimmable
Benefit: Lower maintenance costs Energy efficient product L
Material Finish: Brushed stainless steel & clear pc
Guarantee: 2 years
additional information: Complete with fixing accessories