Also refer to technical help page
Care must be taken when installing exterior lighting products especially those that are ground mounted. All the products are sold and tested fit for purpose and the IP rating is set according to the design and purpose of the luminaire, more details on IP ratings can be found under design ideas section. The weakest point is generally the installation of the product where adequate drainage has not been made for ground buried lights or poor cable joints have been made which are not 100% water tight and will allow for water penetration. There are a number of waterproof enclosures available on this site along with heat shrink cable joint kits and resin gel packs to fill the junction boxes to make a watertight enclosure. Where possible try and keep all joints and transformers above ground, however if this is not possible there are potted burial kits available.
More information in the technical help page
Lamp colour is determined by Kelvins and a lamp which has 2,700 kelvin is classed as warm white and sympathetic to skin tones and warm brickwork etc. A kelvin of 6,500k is in the blueish white spectrum and works well against a white background and will appear brighter to the naked eye than the warm colour spectrum.
All lamps have a lumen number and the higher the lumen number the
brighter the lamp,
however colour of the lamp (kelvins ) also comes in to play here as a
at 6,000 kelvins and above would always appear brighter to the naked
eye than a warmer
colour lamp at the 2,700 kelvins light spectrum even if it has the
same lumen output.
A halogen 150w R7 lamp that is used in a standard garden security
flood light would
produce around 2,300 lumens and a 26w compact fluorescent would
produce around 1,800 lumens. Placing lights closer to the item to be
illuminated is a good way of
using a lower lumen lamp rather than trying to flood light a big
Care should be taken for local wildlife, insects, and general light pollution,
this means the warmer colour spectrum does not interfere with insects and general
wildlife as much as the blue spectrum of light which can disrupt their normal
night time activity, This also applies to bats where a anti glare light fitting works
better as well as reducing overall light pollution in the area.
|Lamp description:||2 x GU10 LED|
|Max wattage:||70 Watt|
|IP rating:||IP 44|
|Suggested lamp:||2 x GU10|
|Dimensions:||225mm H x 70mm W x 75mm D|
|Material Finish:||silver grey|