01689 606342

Theos, rectangle up and down light, white, mains 240v,  E27 lamp base, max 15w

Traditional brick styled wall mounted up down light with very wide beam distribution. It fits nice and flush against the wall with a very minimalist design to be unobtrusive to the eye and just blend in to the building.  Can be used in many applications ideal as  a wall mounted entrance light with minimal glare. Would also look good mounted either side of a garage door on the wall pillars. Creates a nice soft wide beam of light and available in several colours and also available as a down light only option. This is a premium quality product made in Germany and will stand the test of time in the British climate. There is also a matching down light only light fitting.

To be used with a Eco friendly compact fluorescent lamp for reduced maintenance and energy bills. The 15w compact fluorescent lamp produces 850 Lumen's of light and is available in a warm white 2,700 kelvins or a cooler white 4,000 kelvins. Average life expectancy is around 8,000 hours which makes it very energy efficient.

Please ensure that a competent PART P, NIC EIC electrical contractor is used on all your exterior lighting installations. It is very important that all cable joints are made 100% watertight.

Lamp colour ( Kelvins )

The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 6,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften skin tones and gives a warm soft relaxed feel and at the other end of the scale a 4,000 to 6,000 kelvin lamp colour  would be used in offices or a fast food restaurants to make you feel less comfortable and relaxed and more alert. There‚Äôs nothing that can sour your opinion of a compact fluorescent  or LED lamp like buying a 4000K or 5000K bulb when you meant to buy a 2700K bulb, or vice-versa. When you buy a new, energy efficient bulb, keep your application and colour scheme in mind and make sure to buy the bulb with a colour temperature to match.


Light output ( Lumen's )

The amount of light that is produced by a lamp is called lumen's and the more lumen's the lamp has the brighter it will be. Lumen's work in conjunction with kelvins and should not be taken in isolation of each other, for example if you had a very warm white lamp at 2,700 kelvins and it produced 300 lumen's and you then had another lamp which was a cool white 6,000 kelvins which also produced 300 lumen's the cooler lamp colour would always appear brighter to the naked eye than the warmer one this is due to the receptors in the eye that react better to a white light spectrum. Another factor on how bright a light may appear is contrast so if you shine a white 6,000 kelvin light on to a dark wall and a warm 2,700 kelvin lamp on to a white wall the warmer lamp would appear brighter due to the contrast of the material it is focused on. So when choosing a lamp always take in to account the area you want to illuminate and think about Kelvins ( colour ),  Lumen's ( brightness) and contrast  ( colour of area )


More details can be found under technical help page

Choosing the style of a product is only part of the equation you must also think of where that product will be used and how it will be installed. All exterior lighting products on our web site have a IP rating which is explained further in our design ideas section but in simple terms the IP rating is appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation as the weakest point is always cable and transformer joints. All joint must be made 100% water tight and this can be done using heat shrink kits, waterproof junction boxes which are then filled with a resin mix. All joints where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially in clay based soil areas. If possible use ground surface spike lights rather than a buried light.  Mains 240v cable will have less joint than a low voltage installation but care must be taken with the cable runs.

Item Specifications

colour: aluminium brushed, bronze, white
Lamp base: E27
Lamp description: E27 Max 24w
Weight: 1.150 kg
Voltage: 230 Volt
Max wattage: 24 Watt
IP rating: IP 44
Materials: aluminium / glass
Suggested lamp: E27 LED
Width: 22.5 cm
Height: 12.5 cm
Depth: 9 cm
Dimensions: 225mm W x 90mm D x 125mm H
Material Finish: White powder coated Aluminium & Glass
Guarantee: 12 months