01689 606342

Trail light, LED, warm white 3,000K, 20 lumens,  power 0.3w

Small marker light with a 120 degree beam angle. and made with 316 stainless steel. 316 is a marine grade and can be used near coastal regions if required.  
Best used as a marker light due to the wide beam distribution and faceted front lens so would work well in a patio or concourse area. Comes complete with the lamps but requires a toroidal transformer ( Not electronic ).  Be aware of the wattage loading when connecting together. This light fitting comes with LED lamps. Very low power makes this very ECO friendly and safe to touch.

Lamp colour ( Kelvins )

The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 6,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm coulour wavelength helps to soften skin tones and gives a warm soft relaxed feel and at the other end of the scale a 4,000 to 6,000 kelvin lamp colour  would be used in offices or a fast food restaurants to make you feel less comfortable and relaxed and more alert. There‚Äôs nothing that can sour your opinion of a compact fluorescent  or LED lamp like buying a 4000K or 5000K bulb when you meant to buy a 2700K bulb, or vice-versa. When you buy a new, energy efficient bulb, keep your application and color scheme in mind and make sure to buy the bulb with a color temperature to match.



The power LED requires a driver unit to run them

All recessed luminaires must have adequate drainage beneath each fitting to allow water to disperse, especially in clay based soil beds. All cable joint must be 100% watertight and there a number or waterproof transformer boxes and heat shrink cable joint kits on our web site to choose from. We would advise that all connections and transformer be kept above ground where possible as the weakest link in any exterior garden electrical installation is joining cables together.Magic gels and resin compound kits will ensure a 100% waterproof enclosure for the cable joints. To be 100% sure that the cables in the junction box are water tight you can use the magic gel or two part resin mix which is poured in to the box to make a dry connection.

Please ensure that your electrician is NIC EIC certified and has done exterior lighting installations before. Also ensure that all rubber gaskets are clean and dry before screwing down the front glass and bezel for a water tight seal. We would suggest you use a copper grease on the fixing screws to reduce corrosion and make life easier when you need to remove the bezel.

Operate only with a conventional  toroidal transformer


IP Rating

All the luminaires on our web site have been specifically designed fit for purpose and assigned a relevant IP rating which denotes the amount of protection that is required from water and dust. More information on IP ratings can be found in the design ideas section on this web site.


Low maintenance costs      
Energy efficient product      
LEDs with cool running temperature      
Low energy consumption, high light output      

Item Specifications

colour: stainless steel
Lamp description: 4 LED's
Cut out: dia 4 cm
Installation depth: 7 cm
Overall diameter: 6 cm
Weight: 0.165 kg
Voltage: 12 Volt
Max wattage: 3 Watt
IP rating: IP 65
Materials: cover made of stainless steel 316
colour temperature: 3500 kelvin, 6500k