01689 606342

Tubular, 3mtr long, white, sign light, 200mm bracket, T8 fluorescent lamp, IP64, mirror reflector

( Complete with lamp and wall bracket )

Very powerful traditional T8 fluorescent lamp. The light fitting can be wall mounted directly above the sign for maximum illumination. This is the standard in exterior sign lights and has been used by many of the main high street chains. There is an option to have it powder coated in other colours and also LED lamps. The standard wall bracket is 200mm but others are available on request. Also available in Black.

Other lengths are also available to order so please contact the office with your details and we will get a quotation to you.
Built with strong extruded aluminium for exterior use. We can also make it with an integral photo cell if required.

180 degree wide beam symmetric distribution which means the lamp is set back in the fitting and the reflector is curved round the lamp to push the light down and forward with minimal upward light spill.

The two 5ft  T8 fluorescent lamps are colour 840 triphosphor coated for maximum output and colour rendition properties. That means they are 4,000 kelvin colour temperature.


Care must be taken when installing exterior lighting products especially ground buried lights.. All the products are sold fit for purpose and tested  before given an IP rating. More details on IP ratings can be found under design ideas section. The weakest point is generally the installation of the product where adequate drainage has not been made for ground buried lights or poor cable joints have been made which are not 100% water tight and will allow water to penetrate weak joints.. There are a number of waterproof enclosures available on this site along with heat shrink cable joint kits and resin gel packs to fill the junction boxes and make a watertight enclosure. Where possible try and keep all joints and transformers above ground, however if this is not possible there are potted burial kits available.

Lamp colour ( Kelvins )

Lamp colour is determined by the Kelvins and a lamp which is  2,700 kelvins  is classed as warm white and is sympathetic to skin tones and warm brickwork. A lamp with a kelvin of 6500 is in the  cold blueish white spectrum and works well against a white background and will appear brighter to the naked eye than the warmer colour spectrum.

Light output ( Lumen's )

All lamps have a lumen number and the higher the lumen number the brighter the lamp, however colour of the lamp (kelvins ) also comes in to play here as a whiter lamp at 6,000 kelvins and above would always appear brighter to the naked eye than a warmer colour lamp at the 2,700 kelvins light spectrum even if it has the same lumen output.  A halogen 150w R7 lamp that is used in a standard garden security flood light would produce around 2,300 lumens and a 26w compact fluorescent would produce around 1,800 lumens.  Placing lights closer to the item to be illuminated is a good way of using a lower lumen lamp rather than trying to flood light a big area.

Environmental impact

Care should be taken for the environment and local wildlife to maintain the ecological balance. Insects, bats, wildlife can all be effected by  light pollution. The warmer colour spectrum of  ( 2,700 Kelvins ) does not interfere with insects and general wildlife as much as the blue colour spectrum of light around 6,000 kelvins which can disrupt their normal night time activity. This also applies to bats where a anti glare light fittings works better as well as reducing the overall light pollution in the area. You must also be mindful of your neighbors and the effect your lighting can have on them and shining a 500w tungsten halogen flood light in to their windows at night will cause them distress. Try to keep the light in a downward position and local to the items you want to illuminate and even if you want to illuminate tall trees it can be done in a sympathetic way by placing a ground buried or surface spike flood light directly under the trees to illuminate the canopy. Some light fittings also have a anti glare shield fitted to reduce light pollution.

Light levels ( LUX )

Light levels are measured in something called LUX. Put simply LUX is a measurement of light falling on a given surface area. For example an average LUX of 200 would be needed for an outdoor tennis court for recreational purposes and a side street  walkway would have an average of 5 LUX. To calculate lux levels you need a very good calculator or computer as there is a number of factors that need to be taken in to account.

Average levels of illuminance in Lux

Sunny June day 80000 Lux
Bad light stopped play at Lords 1000 Lux
A well lit office 500 Lux
Main road lighting 15 Lux
A residential side street 5 Lux
A clear moonlit night 0.2 Lux

IP Rating

All the luminaires on our web site have been specifically designed fit for purpose and assigned a relevant IP rating which denotes the amount of protection that is required from water and dust. More information on IP ratings can be found in the design ideas section on this web site.


Mini wall mounted sign light in a beautiful powder coated housing .
Uses a twin 5ft  58w triphosphor fluorescent lamp.
Ideal to illuminate shop signs
symmetrical reflector
including a built-in conventional ballast

  • Certified and sealed to IP64
  • T8 Fluorescent tubes
  • Mirror anodized reflectors
  • Supplied as standard with 200mm Uni brackets
  • Tailor made to customer specific lengths
  • Next day delivery
  • BS and RAL colours available on request
  • Can be supplied with a Photo electric cell switch