240v - Adjustable & Robust Swivel Joint Spotlight
Spike lights have been the most popular garden spot lights for years without any significant design changes. Now we've a better, stronger, more versatile light. Simple to adjust, will shine in any direction and looks fantastic. This upgraded design is the “ULTRA SPIKE LIGHT” ! The new strengthened ‘swivel’ neck joint design adjusts via a serrated clamp that is crafted from solid brass in a gold or silver finish.
All versions are supplied with a 5m cable to enable the option of a 10m space between two lights, cutting down the number of cable joins in lighting installation.
The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften the tone of the area and gives a warm soft relaxed feel and ideal for colourful flower beds and rockery areas especially with wooden bark and at the other end of the scale a 4,000 to 5,000 kelvin lamp colour would be used against a light background such as white walls or to accentuate grey blueish foliage in shrubs and small trees. When you buy a new, energy efficient bulb, keep your application and colour scheme in mind and make sure to buy the bulb with a colour temperature to match.
All exterior lighting products on our website have an IP rating which is explained further in our design ideas section but in simple terms the IP rating is appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation as the weakest point is always cable joints. All joints must be made 100% water tight and this can be done using IP68 inline connectors, waterproof junction boxes which are then filled with a resin or gel mix. All joints where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially in clay based soil areas. Also mains cable should be SWA rubber and not PVC.
All exterior lights must be installed by a certified NIC EIC electrician and should be signed off by an electrician with Part P certification. All cable joints must be 100% watertight. There are a selection of waterproof jointing kits and boxes available on this web site.
H05RN-F 3 Core Rubber Sheathed Mains Cable 1.5mm is recommended but do not use PVC flex cable as this can cause poor connections for the cable glands/joints and will lead to capillary action.
|colour:||titanium, black, Garden Green, Natural Copper, Rustic Brown, stainless steel 316|
|Voltage:||240 volt, 12 Volt|
|IP rating:||IP 65|