Waterproof Transformer box IP67
This transformer box is IP67 and is suitable for LED drivers which do not exceed 185mm L x 40mm W x 35mm H.
The weakest point of any exterior lighting project is the work carried out during
installation. Electricity and water don't blend together so it is imperative
that all connecting joints are 100% watertight. This jointing box allows for a waterproof connection for a 12v low voltage or LED transformer.
There are several other types available on the site and where possible we would
always recommend trying to keep joints above ground but there are burial kits available
which can be filled with a resin mix for a water tight connection.
Please ensure that the electrician is NIC EIC approved and has carried out
exterior lighting installations before. There will need to be adequate drainage installed
under each light fitting especially if they are installed in to a clay based soil
area. All rubber gaskets must be dry and clean at the point of install.
For cable-diameter 6 - 13 mm
The dimensions of the transformer box is 295mm L x 45mm W x 60mm H.