01689 606342

Waymarker 180 - 316 Stainless steel - 240v GU10

Waymarkers are a smart modern driveway edge light for installing in paving along a pathway, driveway markers and patio decking lights. They are available in 12v and mains 240v GU10, in both cases a LED lamp can be used to save on energy and keep the fitting cool to touch. A compact fluorescent GU10 base lamp will also work in the waymarker.
The 360, 12v, recessed light has 4 opposing windows providing 360 degree of lighting. It is useful where you want to cast a corona of light in all 4 directions along a path, patio decking or drive edge. They can also be placed in a wall if required to create star like patterns.Will take the weight of a standard vehicle but  NOT SUITABLE FOR AREAS WITH HEAVY GOODS VEHICLES.

Can be used with a GU10 LED lamp to reduce heat and electricity bills.

Colour / Finish

Smart 316 grade stainless steel is a popular choice for modern garden settings

                                                                                    IP rating

IP66, see further details on IP ratings in our design ideas page


Front bezel is attached to tubular aluminium body which unscrews into 2 halves without tools for easy lamp changing. 1m cable via rear entry cable

Input voltage

Mains 240v

Lamp options

GU10 20w or 35w halogen lamp – 38 degree beam for wider staircases or 60 degree beam for wider coverage of a narrower staircase, path or patio. GU10 warm white LED lamps include 3w for lighting across wider steps; 50,000 life and low energy consumption make them a popular option



The plastic sleeve is built into the wall during construction: the light pushes into the tube, where it is held firmly in place by an o-ring, leaving a front plate with no visible fixing screws. Suitable drainage should be provided below each fitting to prevent water logging. Waymarkers should not be installed in ground subject to water logging, an IP68 light should be considered. Using a single RCD for large numbers of 240v fittings is not recommended due to the risk of nuisance tripping. We advise the use of separate RCD protection for each circuit and a maximum of 12 fittings per RCD. Where a garden lighting installation of more than 12 spike mount or recessed lights per circuit is proposed, we suggest the installation of 12v units with transformers, which results in a significantly higher fault tolerance and reliability in the total installation

All recessed luminaires must have adequate drainage beneath each fitting to allow water to disperse, especially in clay based soil beds. All cable joint must be 100% watertight and there a number or waterproof transformer boxes and heat shrink cable joint kits on our web site to choose from. We would advise that all connections be kept above ground where possible as the weakest link in any exterior garden electrical installation is joining cables together.

Please ensure that your electrician is NIC EIC certified and has done exterior lighting installations before. Also ensure that all rubber gaskets are clean and dry before screwing down the front glass and bezel for a water tight seal. We would suggest you use a copper grease on the fixing screws to reduce corrosion and make life easier to rem

Item Specifications

Beam Angle: 180 degree two slots, 360 degree 4 slots
colour: stainless steel, Natural Copper
Voltage: 240 volt, 12v, 12 Volt