01689 606342

Wetsy power, LED, round, 3w, 3,000 kelvin warm white, 200 lumen's, 25 degree beam angle, IP67, 316 stainless steel

( Including a built-in LED driver 350 ma )

A leading edge LED designed 316 stainless steel ground recessed up lighter with built in control gear and lamps. Just wire straight to a mains supply.  LED technology is getting better every year and will be the light source of the future. The lamps are cool to touch and last a long time.

This fitting comes complete with a fitting pot and can take a 1 ton load . There is a 316 stainless steel bezel with 4 fixing screws which means it will be fine near a coastal environment. Please check out details on IP ratings and stainless steel in our design ideas section.

Warm white 3,000 kelvins means the light will appear soft to skin tones and works well illuminating warm brick work or plants.

The lumen output of the light fitting is 200 Lumen's which is about the same as a 6w compact fluorescent lamp at full brightness. 

Lamp colour ( Kelvin's )

The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 6,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften skin tones and gives a warm soft relaxed feel and at the other end of the scale a 4,000 to 6,000 kelvin lamp colour  would be used in offices or a fast food restaurants to make you feel less comfortable and relaxed and more alert. There’s nothing that can sour your opinion of a compact fluorescent  or LED lamp like buying a 4000K or 5000K bulb when you meant to buy a 2700K bulb, or vice-versa. When you buy a new, energy efficient bulb, keep your application and colour scheme in mind and make sure to buy the bulb with a colour temperature to match.  


                    Light output ( Lumen's )

The amount of light that is produced by a lamp is called lumen's and the more lumen's the lamp has the brighter it will be. Lumen's work in conjunction with kelvins and should not be taken in isolation of each other, for example if you had a very warm white lamp at 2,700 kelvins and it produced 300 lumen's and you then had another lamp which was a cool white 6,000 kelvins which also produced 300 lumen's the cooler lamp colour would always appear brighter to the naked eye than the warmer one this is due to the receptors in the eye that react better to a white light spectrum. Another factor on how bright a light may appear is contrast so if you shine a white 6,000 kelvin light on to a dark wall and a warm 2,700 kelvin lamp on to a white wall the warmer lamp would appear brighter due to the contrast of the material it is focused on. So when choosing a lamp always take in to account the area you wantto illuminate and think about Kelvins ( colour ),  Lumen's ( brightness) and contrast  ( colour of area )

Environmental impact

Care should be taken for local wildlife, insects, and general light pollution,  this means the warmer colour spectrum does not interfere with insects and general wildlife as much as the blue spectrum of light which can disrupt there normal night time activity, This also applies to bats where a anti glare light fitting works better as well as reducing overall light pollution in the area.


All recessed luminaires must have adequate drainage beneath each fitting to allow water to disperse, especially in clay based soil beds. All cable joint must be 100% watertight and there a number or waterproof transformer boxes and heat shrink cable joint kits on our web site to choose from. We would advise that all connections and transformer be kept above ground where possible as the weakest link in any exterior garden electrical installation is joining cables together.
Please ensure that your electrician is NIC EIC certified and has done exterior lighting installations before. Also ensure that all rubber gaskets are clean and dry before screwing down the front glass and bezel for a water tight seal. We would suggest you use a copper grease on the fixing screws to reduce corrosion and make life easier when you need to remove the bezel.


Low maintenance costs
1 ton load    
Energy efficient product      
LED's with cool running temperature      
Low energy consumption, high light output
With 140 cm connection lead
Recessed fitting pot included
With 140 cm connection lead
316 stainless

Item Specifications

colour: stainless steel
Lamp description: 3 Power LED's 1 Watt
Cut out: dia 12.6 cm
Installation depth: 10 cm
Overall diameter: 13.2 cm
Weight: 1.100 kg
Voltage: 230 Volt
Max wattage: 3 Watt
IP rating: IP 67
Materials: cover made of stainless steel 316
colour temperature: 3000 Kelvin
shape: circular