01689 606342


ROUND RECESSED LIGHT (LV-SS414R) 316L STAINLESS STEEL OR WITH POWDER COATED FINISH


The LV-SS414R round recessed light is a compact fixture packed full of innovative key features to assist the designer and end user. This fixture is machined from high quality materials and is available in a wide range of finishes to suit most applications. The LV-SS414R has been designed as a universal fixture which can be used in a multitude of design scenarios, from up lighting walls and pillars, to step lighting or mounting in patios and decks. It is also well suited for interior lighting schemes.
Cut out diameter 38mm. Fitting 50mm diameter x 50mm depth including top of bezel. 


Offered in a choice of 6 other finishes, Black, Anodic Bronze, Nato Green, Anthracite Grey, White and Brass
                                                                 
 Designed, manufactured, and hand assembled in England

• 316L stainless steel construction

• Class III (SELV)

Wiring to be in (SERIES)

• Requires a remote (constant current) LED driver 700mA maximum

• 350mA = 1.2w, 500mA = 1.7w, 700mA = 2.4w drivers can be used

• Forward voltage: 3.2v DC

• Colour temperatures: 2700K (warm white) or 4000K (cool white)

• Light source: Cree® XP-E (Light Visuals proprietary interchangeable LED module)

• BIN: 8B4 Q3 

• CRI 85

[email protected] [email protected] (Typical)

• Dimmable 0-10V

• Beam choice; 10º, 18º, 32º ,42, 47x8º Elliptical linear (colour coded and interchangeable)

• IP68 (submersible)

• 1m 2 core HO5RN-F rubber cable (can be supplied up to 10m at additional cost)

• 10 year warranty on brass, stainless steel, powder coated stainless steel. 5 year warranty for LED board.

• PVC installation sleeve supplied

• Product code: LV-SS414R


Wiring to be in (SERIES)

                                                                     

Installation 12v

Choosing the style of a product is only part of the equation you must also think of where that product will be used and how it will be installed. All exterior lighting products on our web site have an IP rating appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation. The weakest point is always cable joints. All joints must be made 100% watertight and this can be done using IP68 cable connectors and/or waterproof junction boxes which are then filled with a re-enterable liquid gel mix. All joints where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially in clay-based soil areas. If possible, use ground surface spike lights rather than a buried light.  Care must be taken with the cable runs and not to install transformers more than 30 metres away from the furthest fitting to avoid any voltage drop. Cabling should be 2 core Rubber HO5RN-F or HO7RN-F and not PVC. PVC leads to capillary action over time especially with UV degradation. Always check the correct type of transformer you need for your fittings. We recommend wiring in parallel with Toroidal AC and LED DC drivers. But when using Milliamp mA LED drivers, they should always be wired in series. Plug and Play kits are simply a case of daisy chaining the fittings via plug and play junction boxes, connectors and extension cables using a 2-pin plug arrangement. 

All exterior lights must be installed by a certified NIC EIC electrician and should be signed off by an electrician with Part P certification. There are a selection of waterproof jointing kits and boxes available on this web site.


Item Specifications

Beam Angle: 10°, 18°, 32°, 42°, 47° x 8°, 10° or 18° or 32° or 42° or 47° x 8 Elliptical
colour: stainless steel 316
Voltage: Constant Current using LED driver, 350mA, 500mA or 700mA, 12v
IP rating: IP 68
Materials: Solid Machined Brass, Anodic Bronze Powder Coat, White Powder Coated, Nato Green powder coated, Anthracite Grey powder coated, Black powder coated, stainless steel 316
Dimensions: 50mm diameter, 48mm depth, 38mm base diameter, bezel 2mm
Dimmable: yes
Lumens: 150 lm
Material Finish: 316 Stainless Steel
watts: 2.4 Watt
colour temperature: 4000k cool white, 2700k warm white
cabling: 1m 2 core HO5RN-F rubber cable
Warranty: 10 yr on stainless steel, 5 yr on LED board