LV-SS602R , LV-BR602R andLV-BL602R Range of lights
LV Round recessed light for floors/steps, IP68, 316L stainless steel -
Also available in Black anodised aluminium and Brass bezel.
Made to order lead time Up to 3 weeks.
Compact 50mm round recessed light designed, manufactured and hand assembled in England.
Has an integral high quality CREE LED chip and comes in warm white 2700k. Up to 2.4w, 140
lumens using a (constant current) LED driver, 350mA, 500mA or 700mA. Choice of beam angles.
1m cable. 5 year guarantee.
British designed, manufactured and hand assembled recessed floor/step light, machined from solid
bar stock in 316L stainless steel .The Black anodised aluminium fittings are machined from solid
bar stock in black. The Brass fittings are on a black body with a brass bezel.
This lighting product has been designed for low glare applications and is most suited for the
lighting of floors and steps.
Can also be used for interior step and staircase projects.
This product has the choice of three light outputs from a constant current supply of either 350mA,
500mA or 700mA.
The minimum output @350mA is 80 lumens @1.2w.
The maximum output @700mA is 140 lumens @2.4w.
Choice of beam angles 10º, 18º, 32º or 42º.
Comes pre wired with 1m of 2 core HO5RN-F rubber cable and a 5 year guarantee.
This fitting is made to order and the lead time is approximately 3 weeks.
Our products utilise integral chips from LED manufacturer CREE, with ‘BIN’ number 8B4. This ‘BIN’
number is a great advantage for professional designers as it gives them confidence is specifying a
particular range of products with complete colour consistency, and eliminates the visible shift in
colour which can be noticeable with poorer quality products placed in close proximity to one
All ground recessed luminaires must have adequate drainage beneath each fitting to allow water to disperse, especially in
clay based soil beds.
All cable joints must be 100% watertight and there are a number or waterproof transformer boxes and heat shrink
cable joint kits on our web site to choose from.
We would advise that all connections and transformers be kept above ground where possible as the weakest link in any
electrical installation is joining cables together. Magic Gel should be used in the termination boxes to reduce
the risk of water ingress.
Please ensure that your electrician is NIC EIC certified and has done exterior lighting installations before and conforms
to Part P certification.