01689 606342



TRIPLE SPIKE LIGHT (LV-SS804) 316 STAINLESS STEEL or BLACK


The LV-804 ground level low-voltage spike light comes equipped with three 316L stainless steel mounting spikes for added stability in loose soil applications.
colour which can be noticeable with poorer quality products placed in close proximity to one another. 

Designed, manufactured, and hand assembled in England.  

316L stainless steel construction

• Class III (SELV)

• Wiring to be in (SERIES)

• Requires a remote (constant current) LED driver 700mA maximum

• 350mA = 1.2w, 500mA = 1.7w, 700mA = 2.4w drivers can be used

• Forward voltage: 3.2v DC

• Colour temperature: 2700K (warm white), 4000K (cool white)

• Light source: Cree® XP-E (Light Visuals proprietary interchangeable LED module)

• BIN: 8B4 Q3

• CRI 85

[email protected] [email protected] (Typical)

• Dimmable 0-10V

• Beam choice; 10º, 18º, 32º, 42º (interchangeable colour coded optics)

• IP68 (submersible)

• 1m 2 core HO5RN-F rubber cable (can be supplied up to 10m at additional cost)

• 10 year warranty brass, stainless steel, powder coated stainless steel

• 5 year LED board

• Product code: LV-SS804


Lamp colour ( Kelvins )
 

The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften the tone of the area and gives a warm soft relaxed feel and ideal for colourful flower beds and rockery areas especially with wooden bark and at the other end of the scale a 4,000 to 5,000 kelvin lamp colour would be used against a light background such as white walls or to accentuate grey blueish foliage in shrubs and small trees.  When you buy a new, energy efficient bulb, keep your application and colour scheme in mind and make sure to buy the bulb with a colour                    temperature to match. 



Installation


All ground recessed luminaires must have adequate drainage beneath each fitting to allow water to disperse, especially in clay based soil beds. 
 All cable joints must be 100% watertight and there are a number or waterproof transformer boxes and heat shrink cable joint kits on our web site to choose from. 
We would advise that all connections and transformers be kept above ground where possible as the weakest link in any exterior garden 
 electrical installation is joining cables together. Magic Gel should be used in the termination boxes to reduce the risk of water ingress. 
Please ensure that your electrician is NIC EIC certified and has done exterior lighting installations before and conforms to Part P certification.

Environmental impact

Care should be taken for the environment and local wildlife to maintain the ecological balance. Insects, bats, wildlife can all be effected by  light pollution. 
The warmer colour spectrum of  ( 2,700 Kelvins ) does not interfere with insects and general wildlife as much as the blue colour spectrum of light 
 around 6,000 kelvins which can disrupt their normal night time activity. This also applies to bats where a anti glare light fittings 
works better as well as reducing the overall light pollution in the area.  


IMPORTANT -  WIRING TO BE IN SERIES



<

Item Specifications

Beam Angle: 10°, 18°, 32°, 42°
Colour: Silver
LED Colour: 2700K
Voltage: 12v
IP Rating: IP68
Materials: stainless steel
Dimmable: yes
Lumens: 80 lm
Bulb Type: integral LED
watts: 1.2w
colour temperature: 2700k warm white
cabling: 1m 2 core HO5RN-F rubber cable
Warranty: 10 years