01689 606342

LV Triple Spike Extension Pole spike light, IP68, in 316L Stainless Steel - or Black. Made to order up to 4 weeks

LV-SS806 & LV-BL806 Range of lights

LV Boarder/path light, IP68,316L stainless steel - and Black anodised 316 stainless steel made to order lead time up to 4 weeks. 
Small 38mm round light designed, manufactured and hand assembled in England. Has an integral 
high quality CREE LED chip and comes in warm white 2700k. Up to 2.4w, 140 lumens using a 
(constant current) LED driver, 350mA, 500mA or 700mA. Choice of beam angles. 
1m cable. 10 year warranty. 
British designed, manufactured and hand assembled solid bar stock316L stainless steel, 
boarder/planter light. 
This tiny fixture is for lighting shrubs,flower beds and paths and is secured with the insertion of the 
three stainless steel spikes in to soil/lawn. Fully adjustable. 
It has a choice of three light outputs from a constant current supply of either 350mA, 500mA or 
700mA. The minimum output @350mA is 80 lumens @1.2w. 
The maximum output @700mA is 140 lumens @2.4w. 
Choice of beam angles 10º, 18º, 32º or 42º. 
Comes pre wired with 1m of 2 core HO5RN-F rubber cable and a 10 year guarantee. 
This fitting is made to order and the lead time is approximately 3 weeks. 
Our products utilise integral chips from LED manufacturer CREE, with ‘BIN’ number 8B4. This ‘BIN’ 
number is a great advantage for professional designers as it gives them confidence is specifying a 
particular range of products with complete colour consistency, and eliminates the visible shift in 
colour which can be noticeable with poorer quality products placed in close pro 
proximity to one another. 

Lamp colour ( Kelvins )

The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften the tone of the area and gives a warm soft relaxed feel and ideal for colourful flower beds and rockery areas especially with wooden bark and at the other end of the scale a 4,000 to 5,000 kelvin lamp colour would be used against a light background such as white walls or to accentuate grey blueish foliage in shrubs and small trees.  When you buy a new, energy efficient bulb, keep your application and colour scheme in mind and make sure to buy the bulb with a colour                    temperature to match. 

Our high quality integral LED's have an extremely long life expectancy. At the end of the LED's life, or in the unlikely event of a premature failure, the LED can be factory replaced for a small fee if out of guarantee.


All recessed luminaires must have adequate drainage beneath each fitting to allow water to disperse, especially in clay based soil beds. 
All cable joints must be 100% watertight and there are a number or waterproof transformer boxes and heat shrink cable joint kits on our 
web site to choose from. 
We would advise that all connections and transformers be kept above ground where possible as the weakest link in any exterior 
garden electrical installation is joining cables together. Magic Gel should be used in the termination boxes to reduce the risk of water ingress. 
Please ensure that your electrician is NIC EIC certified and has done exterior lighting installations before and conforms to Part P certification.



Item Specifications

Beam Angle: 10°, 18°, 32°, 42°
Colour: Silver
Voltage: 12v
IP Rating: IP68
Materials: Stainless Steel
Dimensions: 300mm length from base of fitting to collar, 150mm triple spike, 77mm from collar to top of fitting
Dimmable: yes
Lumens: 80 lm
Bulb Type: Integral LED
Colour Temperature: 2700K
cabling: 1m 2 core HO5RN-F rubber cable
Warranty: 10 Years