LV Boarder/path light, IP68,316L stainless steel -
and Black anodised 316 stainless steel made to order lead time up to 4 weeks.
Small 38mm round light designed, manufactured and hand assembled in England. Has an integral
high quality CREE LED chip and comes in warm white 2700k. Up to 2.4w, 140 lumens using a
(constant current) LED driver, 350mA, 500mA or 700mA. Choice of beam angles.
1m cable. 10 year warranty.
British designed, manufactured and hand assembled solid bar stock316L stainless steel,
This tiny fixture is for lighting shrubs,flower beds and paths and is secured with the insertion of the
three stainless steel spikes in to soil/lawn. Fully adjustable.
It has a choice of three light outputs from a constant current supply of either 350mA, 500mA or
700mA. The minimum output @350mA is 80 lumens @1.2w.
The maximum output @700mA is 140 lumens @2.4w.
Choice of beam angles 10º, 18º, 32º or 42º.
Comes pre wired with 1m of 2 core HO5RN-F rubber cable and a 10 year guarantee.
This fitting is made to order and the lead time is approximately 3 weeks.
Our products utilise integral chips from LED manufacturer CREE, with ‘BIN’ number 8B4. This ‘BIN’
number is a great advantage for professional designers as it gives them confidence is specifying a
particular range of products with complete colour consistency, and eliminates the visible shift in
colour which can be noticeable with poorer quality products placed in close pro
proximity to one
Lamp colour ( Kelvins )
The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700
kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum.
Getting the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften the tone
of the area and gives a warm soft relaxed feel and ideal for colourful flower beds and rockery areas especially with
wooden bark and at the other end of the scale a 4,000 to 5,000 kelvin lamp colour would be used against a light background
such as white walls or to accentuate grey blueish foliage in shrubs and small trees. When you buy a new, energy
efficient bulb, keep your application and colour scheme in mind and make sure to buy the bulb with a colour
temperature to match.
All recessed luminaires must have adequate drainage beneath each fitting to allow water to disperse, especially in clay based
All cable joints must be 100% watertight and there are a number or waterproof transformer boxes and heat shrink cable
joint kits on our
web site to choose from.
We would advise that all connections and transformers be kept above ground where possible as the weakest link in any
garden electrical installation is joining cables together. Magic Gel should be used in the termination boxes to reduce
the risk of water ingress.
Please ensure that your electrician is NIC EIC certified and has done exterior lighting installations before and conforms
to Part P certification.