The hanging light LV-915 is compact, has a solid construction of 316L stainless steel, and incorporates a high quality Cree LED. This product comes equipped with a stainless steel catenary wire quick release system.
The LV-915 hanging light is ideal for suspending from tree branches or garden structures, or from catenary wire systems.
Available in 316L stainless steel. Products are made to order. (Please allow up to 3 weeks for delivery).
LV Hanging Spot light, IP68, 316L stainless steel -
British designed, manufactured and hand assembled solid bar stock, 316L stainless steel
hanging spot light.
This tiny fixture is for hanging from trees, fences, and garden structures including timber gazebos.
It has a choice of three light outputs from a constant current supply of either 350mA, 500mA or
700mA. The minimum output @350mA is 80 lumens @1.2w.
The maximum output @700mA is 140 lumens @2.4w.
Choice of beam angles 10º, 18º, 32º or 42º.
Comes pre wired with 1m of 2 core HO5RN-F rubber cable and a 5 year guarantee.
This fitting is made to order and the lead time is approximately 3 weeks.
Small 38mm round light designed, manufactured and hand assembled in England. Has an integral
high quality CREE LED chip and comes in warm white 2700k. Up to 2.4w, 140 lumens using a
(constant current) LED driver, 350mA, 500mA or 700mA. Choice of beam angles.
1m cable. 5 year guarantee.
(Solid machined brass or copper body with brass loop available as special orders, minimum quantities apply, please enquire for lead times).
The products utilise integral chips from LED manufacturer CREE, with ‘BIN’ number 8B4. This ‘BIN’
number is a great advantage for professional designers as it gives them confidence is specifying a
particular range of products with complete colour consistency, and eliminates the visible shift in
colour which can be noticeable with poorer quality products placed in close proximity to one
• Designed, manufactured, and hand assembled in England
• Black anodised aluminium 6082 or 316L stainless steel construction
• Wiring to be in (SERIES)
• Requires a remote (constant current) LED driver 700mA maximum
• 350mA = 1.2w, 500mA = 1.7w, 700mA = 2.4w drivers can be used
• Forward voltage: 3.2v DC
• Colour temperature: 2700K (warm white)
• Light source: Cree XP-E (integral LED)
• BIN: 8B4 Q3
• CRI 85
• [email protected] [email protected]
• Dimmable 0-10V
• Beam choice; 10º, 18º, 32º , 42º
• 1m 2 core HO5RN-F rubber cable
• 5 year guarantee
• Product code: LV-915
All ground recessed luminaires must have adequate drainage beneath each fitting to allow water to disperse, especially in
clay based soil beds.
All cable joints must be 100% watertight and there are a number or waterproof transformer boxes and heat shrink
cable joint kits on our web site to choose from.
We would advise that all connections and transformers be kept above ground where possible as the weakest link in any
electrical installation is joining cables together. Magic Gel should be used in the termination boxes to reduce
the risk of water ingress.
Please ensure that your electrician is NIC EIC certified and has done exterior lighting installations before and conforms
to Part P certification.
Care should be taken for the environment and local wildlife to maintain the ecological balance. Insects, bats, wildlife can
all be effected by light pollution.
The warmer colour spectrum of ( 2,700 Kelvins ) does not interfere with insects and general wildlife as much as
the blue colour spectrum of light
around 6,000 kelvins which can disrupt their normal night time activity. This also applies to bats where a anti
glare light fittings
works better as well as reducing the overall light pollution in the area.