This professional and robust commercial aluminium bollard light has a ‘Lighthouse’ style head. A matte garden green or stylish graphite black finish is available. A choice of height is available (400mm, 600mm, 800mm or 1000mm). Suitable for every application such as driveways, paths and sectioned areas. There are also 3 styles of head to choose from: ‘domed’, ‘pillar’ or ‘flat’ top.
The head and 2.5mm thick extruded cylinder of the bollard are heavy duty die-cast aluminium. All screws are stainless steel, resulting in a completely rustproof and non-corrosive model.
The Lighthouse has a clear, high quality UV stop PC diffuser surrounding the centre section of the head. This enables an even all-round light dispersal and also adds protection to the bulb installed. Further protection is given by internal silver aluminium louvres. These also add character to the bollard and importantly, act as anti-glare shields.
Bollard lights are available in a variety of styles, finish and lamp options. You need to think about how the light will be used for example a small garden pathway, the main driveway or to illuminate steps etc. If you are within 20 km of the coast you should think about using the Wooden, Copper, Iron, Brass or Marine Grade 316 Stainless Steel. Some bollards have built in LED modules which generally offer lower levels of light (lumens) than a standard LED GU10 lamp. Also, it is likely the LED module is a sealed unit and an integral part of the bollard which cannot be replaced if it fails meaning you will have to purchase a complete new bollard. There are bollards that use GU10 LED lamps and E27 base LED lamps. The spacing of bollards will depend on the type of bollard, louvre design, height and lamp output etc but a general rule of thumb would be no less than 3 meters and no more than 12 meters apart. The shorter distance would be for garden pathways and the longer distance for long driveways.
|Voltage:||220 - 240v|
|IP rating:||IP 65|
|Height:||0.8m, 0.6m, 1.0m, 0.4m|
|Material Finish:||Aluminium / Polycarbonate|
|mounting:||Internal Mounting Base|
|additional information:||Domed Lighthouse Head, Pillar Lighthouse, Flat top Lighthouse|